my hatch has a d15b2 block with z6 head. it came with a p06 ecu in it which i know is a non-vtec ecu. i believe my vtech is working but am not sure how they would have done that. i want to buy a p28. would that be best. planning on turboing it so would i be best off buying a p28 with hondata already hooked up?
thanks in advance

 

It is possible to convert a p06 engine computer to a p28 spec engine computer and they will perform the same.

Your best bet is to open the ecu you have now, snap a picture & post it on the forum or email it to us for identification.

Concerning engine management for a turbo application:
If your ecu is already socketed & chipped you can use the ecu you have now & simply have the car tuned using a chip based tuning software like neptune, ectune, hondata s100 etc.

If you want more of an advanced system you could look into neptune rtp or hondata s300 etc.

Read over http://www.phearable.net/tech/efibeginnerguide.html for more information on this subject.

 

thank you. i will get a pic

 

Yes