hello guys


i need help please

i found leakage under the vtec i open it and i didn't find any gasket or maybe there because there is a filter on it
but it was flat .

so i didn't think its damaged i just put some silicon then i replace it back

but still same again leaking so my question is should i buy a new gasket and replace it or there is any solution

thanks

 

Engine? The solenoid has two gaskets. Replace both. Alternatively, seal both, torque bolts to spec, and let the sealant set a day before driving the car.

 

which engine? the distributor o-ring also is a common leak located right next to the vtec solonoid.

 

i replaced the o ring 1 week ago thanks

 

Very important here. Over torque the bolts and it can leak.

 

i put silicon too and i make it tit thanks

 

thanks ron could u please post a diagram of the vtec gaskets so i know how to get it my car is 1999 civic vti 4 doors d16

here is a picture

 

it can leak from the inside of the dizzy, there is a seal on the inside you can get from partstrain.com