K20z3 : Forged Internals : Getting out the Honda game
Thread Starter
Honda-Tech Member
Joined: Sep 2008
Posts: 686
Likes: 0
From: Town of dreams
K20z3 : Forged Internals : Getting out the Honda game
***900 FIRM FOR EVERYTHING NEED IT GONE!!*****
Everything is located in rosamond 93560
Purchased the K20z3 shortblock from a H-t member about 6 months ago with intentions of building it, but I have higher priorities so I have to let it go.. Vin is still intact and I can give you a bill of sale for it. I was told the engine only had around 30k miles on it and had a seized cam so engine was pulled from a dealership. Engine is fully torn a part and everything looks good. I recommend a full rebuild (i.e. rings, bearings, ect..). I also mic'd the block and there is no ovalization anywhere and its all good.Will come with new timing chain, new chain tensioner, flywheel, and everything else that was given to me.
Getting rid of a prb k20a2 head. Head is in good condition an all torn a part for aftermarket valve train. I have everything stock still besides valve stem seals, which is good to replace anyways.
Supertech 86.5 mm 11.2.1 forged pistons. Never used and will come with rings
Ktuned k20 H beam rods with arp rod bolt. Says M tuned on them and I contacted them and they told me its there sister company. The correct part number is laser etched on the rods also I can give.
Everything is located in rosamond 93560
Purchased the K20z3 shortblock from a H-t member about 6 months ago with intentions of building it, but I have higher priorities so I have to let it go.. Vin is still intact and I can give you a bill of sale for it. I was told the engine only had around 30k miles on it and had a seized cam so engine was pulled from a dealership. Engine is fully torn a part and everything looks good. I recommend a full rebuild (i.e. rings, bearings, ect..). I also mic'd the block and there is no ovalization anywhere and its all good.Will come with new timing chain, new chain tensioner, flywheel, and everything else that was given to me.
Getting rid of a prb k20a2 head. Head is in good condition an all torn a part for aftermarket valve train. I have everything stock still besides valve stem seals, which is good to replace anyways.
Supertech 86.5 mm 11.2.1 forged pistons. Never used and will come with rings
Ktuned k20 H beam rods with arp rod bolt. Says M tuned on them and I contacted them and they told me its there sister company. The correct part number is laser etched on the rods also I can give.
Last edited by es01civy; Jun 20, 2013 at 09:20 PM.
