I used dry ice to remove all the sound deadening stuff. Now I have left over yellow glue stuff. Is there an easy way to remove this?

 

if its glue then i would try putting a towel on it and putting some paint thinner on it so that it can soak there for a little bit. then a wire brush. just a guess i have never removed that glue but thats pretty much how i got glue off from stupid stickers i had that were sunbaked on. the paint thinner maid the glue moist again and then it came off alot easier than when it was dry

 

Kerosene, gloves, rags and a gas mask in a well ventilated area.

 

Yeah, it's the glue. Thanks for the quick replies.

 

Try some PB Blaster.

 

One word....ACETONE

It takes off just about anything.

 

Lighter fluid for zippo lighters works really well too.

 

Do it in a VERY well ventilated area. Working with PB blaster left me with a visit to the ER with poisoning.