So I did the dash swap in my 93 dx hatch. Everything is working properly besides my running lights the blinks and hazards no problems any advice.

 

What harness did you use??

 

you need to run power to i think the yellow wire on one of the connectors to power them on.its been so long since ive done this cant remember exactly.
follow the diy in the faqs.its what i used for mine and everything works.i even wired in a switch to turn off my rear defroster.if you need anymore info pm me.

 

I used the teggy harness everything works I followed the DIY on the FAQ I think they were working with no problems imma test all the wires when I get home an see I'll let you know

 

any progress??

 

what yr integra harness?i think it needs to be obd1.all the people that have used 96 and newer harness have had problems.

 

It fixed its self its a 94 harness but now the left side of my dash lights are flicjering

 

then sounds like there's a short in your harness somewhere, any broken or spliced wires??

 

Yea had to splice the civic pulg into the integra dash harness. I double checked it has been working fine. Sorry for late reply been busy