Im trying to calibrate my new blox tps.

At CT it is at 0 and at WOT it is at 2.7 to 3.2 depending on the position.

I cant seem to get it to go higher than 3.2.

My steps were:

Backprobe red and green wire

Positive to red and neg to green

Multimeter set at 20v dc

Test while key is at second position

Any help is much appreciated

 

doesnt get simpler than this.


http://performance-diy.blogspot.com/...libration.html

 

Well im not very mechanically inclined.

I read that post on a different site already.

I tried by back probing the neg and pos of the tps

and by backprobing just the pos and putting neg on neg of battery.

The first way got me 0 at CT and 2.7 to 3.2 at WOT

And the second way gets me .2 at CT and 3.2 at WOT not matter what position its in.

 

I think i might have installed it incorrectly

 

Ive had this happen to me.

What i did was remove tps and put it back in in a different postion if that makes sense to you,



And yes red lead to middle wire and black to batter negative. Key on #2 pos.

 

ya i think i might not have got the plastic piece between the two metal pieces that allow it to turn. But when i turn it it moves the throttle, Idk im just gonna keep messing w it, just wanted to make sure i wasnt missing something obvious,

Thanks for the quick help man

 

No worries thats what honda tech should be about! thousands of people online.


you should always receive quick response BUT it doesnt always happen.


ANYWAYS yea maybe its not sitting right

 

ya thats why honda tech is the ****

I still havent messed with it but hopefully it was just not sitting right

 

Hopefully that solves your problem...

 

Yes hopefully, i got frustrated and worked on some other stuff but am gonna go at it again tmm and ill let u guys now how it turns out.