Swapping my b16a2 with obd1 conversion

Reply Subscribe

Thread Tools

Search this Thread

Sep 29, 2012 | 08:42 PM

Onefry

Thread Starter

Honda-Tech Member

Joined: Jan 2006

Posts: 22

Likes: 0

From: Howell, NJ, 07731

Swapping my b16a2 with obd1 conversion

I had a 90 crx si with a b16a2..

it was ghetto wired with a obd1 harness+obd1 distributor and injectors and I took it out of the 90 and im putting it into a 91 crx si..

I bought a obd0 to obd1 ecu jumper so I can run an obd1 with an obd0 harness but I'm guessing I need an obd0 engine harness to match up on the chassis side? \

I need to finish this conversion and originally the engine harness was obd1 with the obd0 harness spliced in on the chassis side and half the harness was sitting in the engine bay, was so sloppy!

If I were to convert the now obd1 engine down to obd0 and then plug in my obd1 ecu to the jumper I should be good to go?

Last edited by Former User; Sep 30, 2012 at 07:20 PM. Reason: WTB belongs only in sticky at the top

Sep 30, 2012 | 07:17 PM

habanerored06si

Honda-Tech Member

Joined: Jun 2010

Posts: 484

Likes: 1

From: Toronto, Ontario

Re: Swapping my b16a2 with obd1 conversion..WTB Virgin obd0 harness!

The company Boomslang has the harness stocked. I heard good things.

I have a JDM OBD0 B16A 1st gen that I want to hook up to the Del Sol. I haven't researched all the parts I need for the conversion. Give me a few days maybe we can make a trade.