SD 1992 VX Hatch Built/Boosted SOHC Clean
Thread Starter
Honda-Tech Member
Joined: Oct 2010
Posts: 109
Likes: 0
1992 VX Hatch Built/Boosted SOHC Clean
Name: Zach Krueger
Location: Spearfish SD
Contact: Call/text 605-641-5292 or pm
Price: 10k or trade/partial trade
Throwing my car up for sale. Dont have time or money to do anymore that i want at the moment. Not an ounce of this car was half assed or cheaped out on. All good high quality parts and pieces.
Engine Setup:
D16z6/w JDM trans (ACT Stage 4, 4 puck clutch, ACT lightweight flywheel)
Dyno Tuned on Hondata S300
Made 340hp to the wheels at 16 psi
Shaved and Tucked Bay
-Head:
Crower Turbo Grind Cam
Crower Valves, Springs, Retainers
Ported and polished
5 Angle valve job
Cometic Headgasket .030
Gates Timing Belt
AEM Adjustable cam gear
Skunk2 intake manifold
Skunk2 Throttle body
AEM fuel rail
AEM Fuel Pressure Regulator
-Block:
Benson Sleeved
CP 75.5 pistons
Eagle Rods/ARP bolts
ARP Headstuds
ACL main, rod, thrust bearings
Oem oil pump
Oem Water pump
-Turbo:
Garrett .57 Turbo
Spoolin Performance Turbo Manifold
HKS Blow Off Valve
2.5 Piping
Emusa Intercooler
Precision 39mm wastegate
RC 750cc Injectors
Omni 3 Bar Map Sensor
Walbro 255 Fuel Pump
3" Downpipe
Yonaka Catback Exhaust with electric cutout
MSD Wires
MSD Blaster SS Coil
MSD Distributor Cap
Car Setup:
Exterior:
16' Rota Slips, painted white
205/40/16 Falken Ziex
OEM Mud flaps
OEM carbon fiber hood
OEM carbon fiber tail gate
Carbon vinyl roof layover
All Paint matched mirrors and door handles
paint matched front lip
F&F type 1 coilovers
ASR subframe brace
Beaks lower tie bar
Blox lower control Arms
Integra Rear Disc Swap
All 4 Slotted and Drilled Rotors
Interior:
Custom made Rear seat delete by me
MOMO fixed back seats
Benen harness bar with 4 points on both seats
MOMO steering wheel
C-pillar and rear strut bar
radio delete trays
Red door panel accents
red EG floor mats
AEM Oil Psi
AEM Tru-Boost
AEM Water Temp
AEM Wideband
Custom Gauge bezel in place of center vents
Im being as 100% honest as i can with all interested so no toes are stepped on, i will answer any question you have. Couple issues that i know of with the car right now....
Bad:
-Cracked windshield(will replace before purchase if needed)
-Cf Hood is cracked in a couple spots, its on just to keep the bay clean but it has its spots, can take pics of this if needed
-My body work isent the best straightest ever but its new paint and looks great.
-The electric cutout broke so its just dumped right now, will also replace before purchase if needed
Cant really think of anything else at the moment....
Engine has 350 miles on it since finished. Fresh everything.
Its fun as hell to drive and pulls like a mother ****er. Save the SOHC
Any questions, again please ask. I hate to sell this. Have blood sweat and tears in it but its time for something different.
Will entertain trades, partial trades, would love an s2000 or wrx or something along those lines but let me know what you got. Car is located in spearfish SD, I will NOT deliver anywhere over 100 miles unless we negotiate otherwise. Call or text 605-641-5292 or message me on here
$10,000 Firm. There is more then 10k into the engine setup alone.
I have pictures of the whole build process of everything. Heres just some.
Location: Spearfish SD
Contact: Call/text 605-641-5292 or pm
Price: 10k or trade/partial trade
Throwing my car up for sale. Dont have time or money to do anymore that i want at the moment. Not an ounce of this car was half assed or cheaped out on. All good high quality parts and pieces.
Engine Setup:
D16z6/w JDM trans (ACT Stage 4, 4 puck clutch, ACT lightweight flywheel)
Dyno Tuned on Hondata S300
Made 340hp to the wheels at 16 psi
Shaved and Tucked Bay
-Head:
Crower Turbo Grind Cam
Crower Valves, Springs, Retainers
Ported and polished
5 Angle valve job
Cometic Headgasket .030
Gates Timing Belt
AEM Adjustable cam gear
Skunk2 intake manifold
Skunk2 Throttle body
AEM fuel rail
AEM Fuel Pressure Regulator
-Block:
Benson Sleeved
CP 75.5 pistons
Eagle Rods/ARP bolts
ARP Headstuds
ACL main, rod, thrust bearings
Oem oil pump
Oem Water pump
-Turbo:
Garrett .57 Turbo
Spoolin Performance Turbo Manifold
HKS Blow Off Valve
2.5 Piping
Emusa Intercooler
Precision 39mm wastegate
RC 750cc Injectors
Omni 3 Bar Map Sensor
Walbro 255 Fuel Pump
3" Downpipe
Yonaka Catback Exhaust with electric cutout
MSD Wires
MSD Blaster SS Coil
MSD Distributor Cap
Car Setup:
Exterior:
16' Rota Slips, painted white
205/40/16 Falken Ziex
OEM Mud flaps
OEM carbon fiber hood
OEM carbon fiber tail gate
Carbon vinyl roof layover
All Paint matched mirrors and door handles
paint matched front lip
F&F type 1 coilovers
ASR subframe brace
Beaks lower tie bar
Blox lower control Arms
Integra Rear Disc Swap
All 4 Slotted and Drilled Rotors
Interior:
Custom made Rear seat delete by me
MOMO fixed back seats
Benen harness bar with 4 points on both seats
MOMO steering wheel
C-pillar and rear strut bar
radio delete trays
Red door panel accents
red EG floor mats
AEM Oil Psi
AEM Tru-Boost
AEM Water Temp
AEM Wideband
Custom Gauge bezel in place of center vents
Im being as 100% honest as i can with all interested so no toes are stepped on, i will answer any question you have. Couple issues that i know of with the car right now....
Bad:
-Cracked windshield(will replace before purchase if needed)
-Cf Hood is cracked in a couple spots, its on just to keep the bay clean but it has its spots, can take pics of this if needed
-My body work isent the best straightest ever but its new paint and looks great.
-The electric cutout broke so its just dumped right now, will also replace before purchase if needed
Cant really think of anything else at the moment....
Engine has 350 miles on it since finished. Fresh everything.
Its fun as hell to drive and pulls like a mother ****er. Save the SOHC
Any questions, again please ask. I hate to sell this. Have blood sweat and tears in it but its time for something different.
Will entertain trades, partial trades, would love an s2000 or wrx or something along those lines but let me know what you got. Car is located in spearfish SD, I will NOT deliver anywhere over 100 miles unless we negotiate otherwise. Call or text 605-641-5292 or message me on here
$10,000 Firm. There is more then 10k into the engine setup alone.
I have pictures of the whole build process of everything. Heres just some.
Last edited by Krueger3; Dec 10, 2012 at 10:43 AM.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Oct 2010
Posts: 109
Likes: 0
Re: 1992 VX Hatch Built/Boosted SOHC Clean
If anyone is interested in this, Its up for sale again. Price isent very negotiable as i dont want to sell it but i never drive it so if i can get the money then so be it.
Trial User
Joined: Sep 2011
Posts: 1
Likes: 0
Re: 1992 VX Hatch Built/Boosted SOHC Clean
Thread Starter
Honda-Tech Member
Joined: Oct 2010
Posts: 109
Likes: 0
Re: 1992 VX Hatch Built/Boosted SOHC Clean
Your pm box is full pm me
Give me some info on the s2000 please, your Craigslist add didn't work for me. I'm really interested though. Pics,price,miles, everything let me know!
Give me some info on the s2000 please, your Craigslist add didn't work for me. I'm really interested though. Pics,price,miles, everything let me know!
