Short version: I started a Honda build project that was 500hp capable (intended to run around 400whp) and just lost interest and went back to my FD build.

I have sold the car and some various parts, but still have plenty to get rid of... All parts are either BNIB or, in the case of the motor, not run since the rebuild.

I do have more pics and can get others on request.

The head:

B16
ARP Head Studs
GSR Cams
Full Cometic Top-End Gasket Kit
Lapped valves

$600

The valve cover can be powder coated for an extra $50 if you want another color.

Turbo Kit:
T3/T04E Turbo
Cast T3 Manifold (currently tapped for T2 turbo from previous owner. Can have my mechanics weld up holes and tap for T3)
FMIC
All IC Pipes
External Wastegate
Greddy Knock-Off BOV

$800 obo

This kit I kind of bought on a whim. I tore apart and cleaned up the turbo. There is very minor in and out movement which I expect is due to there being 0 oil in it now. The shaft does spin freely. There are small chips in a couple fins that I recently noticed (basically one corner chipped off).

Previous owner painted it smurf blue.. I have no idea...... I have stripped the housing and polished it.

MISC:
SPEC Stage III B18 Clutch for 94-00 Integra (LS Tranny) - $350


I have a couple other parts that I'm just not thinking of right now... A good bit has sold recently so I don't want to accidentally post something that's already gone...

Local pick-up is preferred but shipping can be arranged at an additional cost.

 

*bump*

If you have questions or want additional pics, just let me know! Support the big single turbo on an FD fund!!

 

Oook so found out my dog's cancer is back and will be spending a lot of money again... Make some offers guys. I really just need to get this stuff out of here..

Likely to start parting it out. The build has 0 miles on it and I still have all the packaging for all of the new parts (pistons, rods, etc).

I also have an EK trunk lid but shipping would be a PITA. If someone is local and in need of one in good shape, we can work something out.

 

Bump, would you be interested in splitting the motor up? if so How much for the short block Shipped to Cali? Pm me

 

I may actually be doing that.

I should find out today about someone local wanting to buy everything. If that falls through, I have one other person looking to buy the block but will let you know if things don't pan out.

 

Block has been sold! Head is pending but not sold yet.

Turbo kit is now $800 obo and clutch is $350.