FS: High Power Turbo Parts and More
Thread Starter
Honda-Tech Member
Joined: May 2004
Posts: 1,879
Likes: 0
From: Portland, OR, USA
FS: High Power Turbo Parts and More
I’m clearing out all my Honda parts. I’ve been out of the Honda scene for a few years and moved on with life. These are left over parts that I have kept around in case I decide to build another Honda. I’ve moved on and probably would never build another Honda again.
Prices are reasonable, but I’m willing to hear offers. I’m not desperate to sell either, so please don’t make lowball offers. I prefer not to ship the bigger items. I’m located in Portland/ Clackamas Oregon. I prefer local pickup or meet up within reasonable distances for the bigger items.
If somebody is looking to build a high power turbo car and wants the whole package, I’m willing to work out a great deal too. The only thing missing to have a complete running setup is a fuel system. I had one but sold it to a buddy a couple years ago.
1994 Integra LS shell. Painted Silverstone Metallic, shaved moldings, painted engine bay and door jams. Clean tittle. Extra painted front bumper, 98+ front and rear conversion , KYB AGX shocks with Ground Control coilovers. Interior is all there, just without seats. ABS has been removed. Paint is new, will need to be cut and buffed to get mirror shine. Missing seats and a swap to be a running car again. $2000 OBO
Full-Race / Garrett GT3567R. Brand new never used. Been sitting on my shelf for a few years. Capable of 700WHP. $1100 OBO
B18C1 block, fully built. Darton Sleeves, CP pistons, Eagle rods, OEM Honda bearings, Balanced rotating assembly. ARP Main bolts, and head studs. The block was built, ran NA for 500 miles to break in, and the car was parted out. SOLD!!!
JG B16 head. Fully built, port and polished, 5 angle valve jobs.... SOLD!!!
JG Edelbrock Victor-X intake manifold, used to break in the motor for about 500 miles. SOLD
STR 68mm throttle body. SOLD
Skunk2 stage 1 cams. Used for about 1000 miles. SOLDD!!!
AEM 1020 box. OBD2A. Barely used, plastic still on the front. $500
Stock B16 head, complete without distributor $400
JDM Gsr transmission with LSD. Great condition. SOLD
Crower Pro Billet rods for GSR blocks. Rods are brand new, never used, but have sat for years. These are not the low end ones. SOLDDD
Big custom made intercooler, made with Vibrant intercooler core, with 3” inlet and outlet. Capable of 700+ WHP. Dimensions are approximately 14” tall and 30” wide. $300
Greddy Type R Blow Off Valve, with pipe and flange. $225
AEM ignition box with 8 CBR coils. SOLD!!
OBD1 B16 distributor $150
OEM Type R Valve cover, mint condition SOLD
BDL fuel filter $40
Full-Race replica top mount turbo manifold. For B-series. Turbo flange will need to be machine as it was warped when it got welded on. With 3” downpipe, and dumptube. 38mm waste gate flange. PENDING SALE
Tial 38mm waste gate. Black top. SOLD
Fluidyne 1/2 radiator with slim fan. SOLD
ACT Extreme pressure plate, with Competition 6 puck clutch. Used for 500 miles to break in motor. SOLD
A Ton of -10 black AN fittings, some straight fittings, some elbows, some aluminum weld bungs. Close to 100 fittings. Enough to do a few valve cover breather setups. Give me a list of what you need and I’ll give you the price.
15ft of -12 SS braided line. $50
Greddy Turbo Timer SOLD
AEM Wideband. Brand new SOLD
Dual pillar gauge pod for DCs SOLD
Greddy catch can with Greddy plastic lines. SOLD
Greddy Oil Filter Relocation Kit without lines. $60
OEM Integra Type-R Lip. Painted Silverstone Metallic. $300
Gold Weld Magnum 13" beadlock wheels. Brand new, never used. If I remember correctly, weld made very very limited quanity of these for Honda Applications. $850
Integra SIR-G corner lights SOLD
Turbo Oil Line SOLD
Ball bearing turbo water lines. Includes fittings to connect to turbo, not in the picture. $80
Turbo coupling and clamps. $45 for the bundle. $4 for a pair of clamp, $5 per coupling. ONLY 3" COUPLINGS AND CLAMPS LEFT. ALL 2.5" ARE GONE.
Buddyclub P1. White with red lip. Brand New Never used. $500
Buddy Club N1+ Full body coilovers. Used for about 3-5K. In great condition. SOLD!!
Megan Racing C and B Pillar Bars. $100 OBO for both.
OBD-1 DOHC VTEC Engine Harness. Virgin, has not been hacked or cut at all. Plug and Play for the guys doing motor swaps. SOLD
GSR Cams $80
Oil line for Greddy Turbo $25
B-series shift linkage $100
GSR strut bar $20
Carbon fiber gas lid for Integras. It's freal carbon fiber over an oem metal lid, not all Carbon fiber. SOLD
3" upgrade downpipe for Greddy turbo setups SOLD
Misc B-series mounts. $20 a piece
Intercooler Piping bends. PM me what you want for price.
Misc Amps $30 a piece
OEM 94-97 Integra corner lights. $20 a pair, I have two pairs.
OEM Type R shift boot. Brand new. I have two of them. $30 a piece
OEM Honda resistor box, used for low impedance injectors. $15
Japanese brand quick release. This is a hex pattern quick release that doesn't have any slop or play like the other quick releases. SOLD
B-series AC Compressor $30
Complete B-series swap motor mounts for EK Civics. $100
JDM EK thin moldings SOLD
A pair of Polk audio speakers. $20
JDM EK side markers $25
GM 3bar Map sensor. Brand new with pigtail SOLD
B-series Starter. They've been sitting around for years. I can't guaranty they are perfect. So I am going to suggest replacing the contacts to have a perfect starter. If needed, I can replace the contacts before purchases. $40 a piece. $70 with new contacts.
HKS air filter SOLD
Black Integra steering wheel with airbag $100
EK Si / EM1 gauge cluster. SOLD
I’ll add more parts as I clean out my garage. More parts coming.[/QUOTE]
Prices are reasonable, but I’m willing to hear offers. I’m not desperate to sell either, so please don’t make lowball offers. I prefer not to ship the bigger items. I’m located in Portland/ Clackamas Oregon. I prefer local pickup or meet up within reasonable distances for the bigger items.
If somebody is looking to build a high power turbo car and wants the whole package, I’m willing to work out a great deal too. The only thing missing to have a complete running setup is a fuel system. I had one but sold it to a buddy a couple years ago.
1994 Integra LS shell. Painted Silverstone Metallic, shaved moldings, painted engine bay and door jams. Clean tittle. Extra painted front bumper, 98+ front and rear conversion , KYB AGX shocks with Ground Control coilovers. Interior is all there, just without seats. ABS has been removed. Paint is new, will need to be cut and buffed to get mirror shine. Missing seats and a swap to be a running car again. $2000 OBO
Full-Race / Garrett GT3567R. Brand new never used. Been sitting on my shelf for a few years. Capable of 700WHP. $1100 OBO
B18C1 block, fully built. Darton Sleeves, CP pistons, Eagle rods, OEM Honda bearings, Balanced rotating assembly. ARP Main bolts, and head studs. The block was built, ran NA for 500 miles to break in, and the car was parted out. SOLD!!!
JG B16 head. Fully built, port and polished, 5 angle valve jobs.... SOLD!!!
JG Edelbrock Victor-X intake manifold, used to break in the motor for about 500 miles. SOLD
STR 68mm throttle body. SOLD
Skunk2 stage 1 cams. Used for about 1000 miles. SOLDD!!!
AEM 1020 box. OBD2A. Barely used, plastic still on the front. $500
Stock B16 head, complete without distributor $400
JDM Gsr transmission with LSD. Great condition. SOLD
Crower Pro Billet rods for GSR blocks. Rods are brand new, never used, but have sat for years. These are not the low end ones. SOLDDD
Big custom made intercooler, made with Vibrant intercooler core, with 3” inlet and outlet. Capable of 700+ WHP. Dimensions are approximately 14” tall and 30” wide. $300
Greddy Type R Blow Off Valve, with pipe and flange. $225
AEM ignition box with 8 CBR coils. SOLD!!
OBD1 B16 distributor $150
OEM Type R Valve cover, mint condition SOLD
BDL fuel filter $40
Full-Race replica top mount turbo manifold. For B-series. Turbo flange will need to be machine as it was warped when it got welded on. With 3” downpipe, and dumptube. 38mm waste gate flange. PENDING SALE
Tial 38mm waste gate. Black top. SOLD
Fluidyne 1/2 radiator with slim fan. SOLD
ACT Extreme pressure plate, with Competition 6 puck clutch. Used for 500 miles to break in motor. SOLD
A Ton of -10 black AN fittings, some straight fittings, some elbows, some aluminum weld bungs. Close to 100 fittings. Enough to do a few valve cover breather setups. Give me a list of what you need and I’ll give you the price.
15ft of -12 SS braided line. $50
Greddy Turbo Timer SOLD
AEM Wideband. Brand new SOLD
Dual pillar gauge pod for DCs SOLD
Greddy catch can with Greddy plastic lines. SOLD
Greddy Oil Filter Relocation Kit without lines. $60
OEM Integra Type-R Lip. Painted Silverstone Metallic. $300
Gold Weld Magnum 13" beadlock wheels. Brand new, never used. If I remember correctly, weld made very very limited quanity of these for Honda Applications. $850
Integra SIR-G corner lights SOLD
Turbo Oil Line SOLD
Ball bearing turbo water lines. Includes fittings to connect to turbo, not in the picture. $80
Turbo coupling and clamps. $45 for the bundle. $4 for a pair of clamp, $5 per coupling. ONLY 3" COUPLINGS AND CLAMPS LEFT. ALL 2.5" ARE GONE.
Buddyclub P1. White with red lip. Brand New Never used. $500
Buddy Club N1+ Full body coilovers. Used for about 3-5K. In great condition. SOLD!!
Megan Racing C and B Pillar Bars. $100 OBO for both.
OBD-1 DOHC VTEC Engine Harness. Virgin, has not been hacked or cut at all. Plug and Play for the guys doing motor swaps. SOLD
GSR Cams $80
Oil line for Greddy Turbo $25
B-series shift linkage $100
GSR strut bar $20
Carbon fiber gas lid for Integras. It's freal carbon fiber over an oem metal lid, not all Carbon fiber. SOLD
3" upgrade downpipe for Greddy turbo setups SOLD
Misc B-series mounts. $20 a piece
Intercooler Piping bends. PM me what you want for price.
Misc Amps $30 a piece
OEM 94-97 Integra corner lights. $20 a pair, I have two pairs.
OEM Type R shift boot. Brand new. I have two of them. $30 a piece
OEM Honda resistor box, used for low impedance injectors. $15
Japanese brand quick release. This is a hex pattern quick release that doesn't have any slop or play like the other quick releases. SOLD
B-series AC Compressor $30
Complete B-series swap motor mounts for EK Civics. $100
JDM EK thin moldings SOLD
A pair of Polk audio speakers. $20
JDM EK side markers $25
GM 3bar Map sensor. Brand new with pigtail SOLD
B-series Starter. They've been sitting around for years. I can't guaranty they are perfect. So I am going to suggest replacing the contacts to have a perfect starter. If needed, I can replace the contacts before purchases. $40 a piece. $70 with new contacts.
HKS air filter SOLD
Black Integra steering wheel with airbag $100
EK Si / EM1 gauge cluster. SOLD
I’ll add more parts as I clean out my garage. More parts coming.[/QUOTE]
Last edited by viet_boi_racin; Jun 22, 2012 at 01:47 PM.
Re: FS: High Power Turbo Parts and More
hey whats up i pm'd you about the fittings a couple times.
im a serious buyer!
please let me know on them
2 90's
7 straights
and please include the price shipped and your paypal address in message.
thanks,
jack
im a serious buyer!
please let me know on them
2 90's
7 straights
and please include the price shipped and your paypal address in message.
thanks,
jack
Last edited by eg6-jarhead; May 14, 2012 at 05:38 PM.
Trending Topics
for ya!
Honda-Tech Member
Joined: May 2002
Posts: 3,041
Likes: 0
From: Los Angeles, CA, USA
Re: FS: High Power Turbo Parts and More
Check pm, if you can ship the item tomorrow let me know,
So I can send you the payment now.
I sent you my email & my number to reach me. Text or email me so
I can reply quicker. Thanks
So I can send you the payment now.
I sent you my email & my number to reach me. Text or email me so
I can reply quicker. Thanks
Thread Starter
Honda-Tech Member
Joined: May 2004
Posts: 1,879
Likes: 0
From: Portland, OR, USA
Re: FS: High Power Turbo Parts and More
I’m clearing out all my Honda parts. I’ve been out of the Honda scene for a few years and moved on with life. These are left over parts that I have kept around in case I decide to build another Honda. I’ve moved on and probably would never build another Honda again.
Prices are reasonable, but I’m willing to hear offers. I’m not desperate to sell either, so please don’t make lowball offers. I prefer not to ship the bigger items. I’m located in Portland/ Clackamas Oregon. I prefer local pickup or meet up within reasonable distances for the bigger items.
If somebody is looking to build a high power turbo car and wants the whole package, I’m willing to work out a great deal too. The only thing missing to have a complete running setup is a fuel system. I had one but sold it to a buddy a couple years ago.
1994 Integra LS shell. Painted Silverstone Metallic, shaved moldings, painted engine bay and door jams. Clean tittle. Extra painted front bumper, 98+ front and rear conversion , KYB AGX shocks with Ground Control coilovers. Interior is all there, just without seats. ABS has been removed. Paint is new, will need to be cut and buffed to get mirror shine. Missing seats and a swap to be a running car again. $2000 OBO
Full-Race / Garrett GT3567R. Brand new never used. Been sitting on my shelf for a few years. Capable of 700WHP. $1100 OBO
B18C1 block, fully built. Darton Sleeves, CP pistons, Eagle rods, OEM Honda bearings, Balanced rotating assembly. ARP Main bolts, and head studs. The block was built, ran NA for 500 miles to break in, and the car was parted out. $2300 OBO
JG B16 head. Fully built, port and polished, 5 angle valve jobs, Ferrea valves, SuperTech Valve springs. $1000
JG Edelbrock Victor-X intake manifold, used to break in the motor for about 500 miles. $250 PENDING SALE!!
STR 68mm throttle body. $150
Skunk2 stage 1 cams. Used for about 1000 miles. SOLDD!!!
AEM 1020 box. OBD2A. Barely used, plastic still on the front. $600
Stock B16 head, complete without distributor $400
JDM Gsr transmission with LSD. Great condition. $800
Crower Pro Billet rods for GSR blocks. Rods are brand new, never used, but have sat for years. These are not the low end ones. SOLDDD
Big custom made intercooler, made with Vibrant intercooler core, with 3” inlet and outlet. Capable of 700+ WHP. Dimensions are approximately 14” tall and 30” wide. $300
Greddy Type R Blow Off Valve, with pipe and flange. $225
AEM ignition box with 8 CBR coils. SOLD!!
OBD1 B16 distributor $150
OEM Type R Valve cover, mint condition SOLD
BDL fuel filter $40
Full-Race replica top mount turbo manifold. For B-series. Turbo flange will need to be machine as it was warped when it got welded on. With 3” downpipe, and dumptube. 38mm waste gate flange. $650 for the complete set up.
Tial 38mm waste gate. Black top. $140
Fluidyne 1/2 radiator with slim fan. SOLD
ACT Extreme pressure plate, with Competition 6 puck clutch. Used for 500 miles to break in motor. SOLD
A Ton of -10 black AN fittings, some straight fittings, some elbows, some aluminum weld bungs. Close to 100 fittings. Enough to do a few valve cover breather setups. Give me a list of what you need and I’ll give you the price.
15ft of -12 SS braided line. $50
Greddy Turbo Timer $40
AEM Wideband. Brand new SOLD
Dual pillar gauge pod for DCs SOLD
Greddy catch can with Greddy plastic lines. SOLD
Greddy Oil Filter Relocation Kit without lines. $60
OEM Integra Type-R Lip. Painted Silverstone Metallic. $300
Gold Weld Magnum 13" beadlock wheels. Brand new, never used. If I remember correctly, weld made very very limited quanity of these for Honda Applications. $850
Integra SIR-G corner lights SOLD
Turbo Oil Line SOLD
Ball bearing turbo water lines. Includes fittings to connect to turbo, not in the picture. $80
Turbo coupling and clamps. $45 for the bundle. $4 for a pair of clamp, $5 per coupling. ONLY 3" COUPLINGS AND CLAMPS LEFT. ALL 2.5" ARE GONE.
Buddyclub P1. White with red lip. Brand New Never used. $500 SALE PENDING!
Buddy Club N1+ Full body coilovers. Used for about 3-5K. In great condition. $650 OBO SALE PENDING!
Megan Racing C and B Pillar Bars. $100 OBO for both.
OBD-1 DOHC VTEC Engine Harness. Virgin, has not been hacked or cut at all. Plug and Play for the guys doing motor swaps. $150
GSR Cams $80
Oil line for Greddy Turbo SOLD
B-series shift linkage $100
GSR strut bar $20
Carbon fiber gas lid for Integras. It's freal carbon fiber over an oem metal lid, not all Carbon fiber. SOLD
3" upgrade downpipe for Greddy turbo setups SOLD
Misc B-series mounts. $20 a piece
Intercooler Piping bends. PM me what you want for price.
Misc Amps $30 a piece
OEM 94-97 Integra corner lights. $20 a pair, I have two pairs.
OEM Type R shift boot. Brand new. I have two of them. $30 a piece
OEM Honda resistor box, used for low impedance injectors. $15
Japanese brand quick release. This is a hex pattern quick release that doesn't have any slop or play like the other quick releases. SOLD
B-series AC Condensors $30
Complete B-series swap motor mounts for EK Civics. $100
JDM EK thin moldings $200
A pair of Polk audio speakers. $20
JDM EK side markers $25
GM 3bar Map sensor. Brand new with pigtail SOLD
B-series Starter. They've been sitting around for years. I can't guaranty they are perfect. So I am going to suggest replacing the contacts to have a perfect starter. If needed, I can replace the contacts before purchases. $40 a piece. $70 with new contacts.
HKS air filter $15
Black Integra steering wheel with airbag $100
EK Si / EM1 gauge cluster. SOLD
I’ll add more parts as I clean out my garage. More parts coming.
Prices are reasonable, but I’m willing to hear offers. I’m not desperate to sell either, so please don’t make lowball offers. I prefer not to ship the bigger items. I’m located in Portland/ Clackamas Oregon. I prefer local pickup or meet up within reasonable distances for the bigger items.
If somebody is looking to build a high power turbo car and wants the whole package, I’m willing to work out a great deal too. The only thing missing to have a complete running setup is a fuel system. I had one but sold it to a buddy a couple years ago.
1994 Integra LS shell. Painted Silverstone Metallic, shaved moldings, painted engine bay and door jams. Clean tittle. Extra painted front bumper, 98+ front and rear conversion , KYB AGX shocks with Ground Control coilovers. Interior is all there, just without seats. ABS has been removed. Paint is new, will need to be cut and buffed to get mirror shine. Missing seats and a swap to be a running car again. $2000 OBO
Full-Race / Garrett GT3567R. Brand new never used. Been sitting on my shelf for a few years. Capable of 700WHP. $1100 OBO
B18C1 block, fully built. Darton Sleeves, CP pistons, Eagle rods, OEM Honda bearings, Balanced rotating assembly. ARP Main bolts, and head studs. The block was built, ran NA for 500 miles to break in, and the car was parted out. $2300 OBO
JG B16 head. Fully built, port and polished, 5 angle valve jobs, Ferrea valves, SuperTech Valve springs. $1000
JG Edelbrock Victor-X intake manifold, used to break in the motor for about 500 miles. $250 PENDING SALE!!
STR 68mm throttle body. $150
Skunk2 stage 1 cams. Used for about 1000 miles. SOLDD!!!
AEM 1020 box. OBD2A. Barely used, plastic still on the front. $600
Stock B16 head, complete without distributor $400
JDM Gsr transmission with LSD. Great condition. $800
Crower Pro Billet rods for GSR blocks. Rods are brand new, never used, but have sat for years. These are not the low end ones. SOLDDD
Big custom made intercooler, made with Vibrant intercooler core, with 3” inlet and outlet. Capable of 700+ WHP. Dimensions are approximately 14” tall and 30” wide. $300
Greddy Type R Blow Off Valve, with pipe and flange. $225
AEM ignition box with 8 CBR coils. SOLD!!
OBD1 B16 distributor $150
OEM Type R Valve cover, mint condition SOLD
BDL fuel filter $40
Full-Race replica top mount turbo manifold. For B-series. Turbo flange will need to be machine as it was warped when it got welded on. With 3” downpipe, and dumptube. 38mm waste gate flange. $650 for the complete set up.
Tial 38mm waste gate. Black top. $140
Fluidyne 1/2 radiator with slim fan. SOLD
ACT Extreme pressure plate, with Competition 6 puck clutch. Used for 500 miles to break in motor. SOLD
A Ton of -10 black AN fittings, some straight fittings, some elbows, some aluminum weld bungs. Close to 100 fittings. Enough to do a few valve cover breather setups. Give me a list of what you need and I’ll give you the price.
15ft of -12 SS braided line. $50
Greddy Turbo Timer $40
AEM Wideband. Brand new SOLD
Dual pillar gauge pod for DCs SOLD
Greddy catch can with Greddy plastic lines. SOLD
Greddy Oil Filter Relocation Kit without lines. $60
OEM Integra Type-R Lip. Painted Silverstone Metallic. $300
Gold Weld Magnum 13" beadlock wheels. Brand new, never used. If I remember correctly, weld made very very limited quanity of these for Honda Applications. $850
Integra SIR-G corner lights SOLD
Turbo Oil Line SOLD
Ball bearing turbo water lines. Includes fittings to connect to turbo, not in the picture. $80
Turbo coupling and clamps. $45 for the bundle. $4 for a pair of clamp, $5 per coupling. ONLY 3" COUPLINGS AND CLAMPS LEFT. ALL 2.5" ARE GONE.
Buddyclub P1. White with red lip. Brand New Never used. $500 SALE PENDING!
Buddy Club N1+ Full body coilovers. Used for about 3-5K. In great condition. $650 OBO SALE PENDING!
Megan Racing C and B Pillar Bars. $100 OBO for both.
OBD-1 DOHC VTEC Engine Harness. Virgin, has not been hacked or cut at all. Plug and Play for the guys doing motor swaps. $150
GSR Cams $80
Oil line for Greddy Turbo SOLD
B-series shift linkage $100
GSR strut bar $20
Carbon fiber gas lid for Integras. It's freal carbon fiber over an oem metal lid, not all Carbon fiber. SOLD
3" upgrade downpipe for Greddy turbo setups SOLD
Misc B-series mounts. $20 a piece
Intercooler Piping bends. PM me what you want for price.
Misc Amps $30 a piece
OEM 94-97 Integra corner lights. $20 a pair, I have two pairs.
OEM Type R shift boot. Brand new. I have two of them. $30 a piece
OEM Honda resistor box, used for low impedance injectors. $15
Japanese brand quick release. This is a hex pattern quick release that doesn't have any slop or play like the other quick releases. SOLD
B-series AC Condensors $30
Complete B-series swap motor mounts for EK Civics. $100
JDM EK thin moldings $200
A pair of Polk audio speakers. $20
JDM EK side markers $25
GM 3bar Map sensor. Brand new with pigtail SOLD
B-series Starter. They've been sitting around for years. I can't guaranty they are perfect. So I am going to suggest replacing the contacts to have a perfect starter. If needed, I can replace the contacts before purchases. $40 a piece. $70 with new contacts.
HKS air filter $15
Black Integra steering wheel with airbag $100
EK Si / EM1 gauge cluster. SOLD
I’ll add more parts as I clean out my garage. More parts coming.