Hey there, i was building this motor for turbo, pistons i pulled out are 81.5mm, as well as bore on the block, i had piston to wall clearence issues with my forged pistons so i had to get a gsr block,therefore this block and the internals in it that im not using are for sale:
bought the motor and was told there was 140 xxx KMs yes thats KM not miles on it, but unknown amount after it was obviously rebuilt and bored to 81.5mm
if you pm with any questions or send me your email address and i will send pictures!

b18c5 bare block 81.5 mm bore
asking $150 OBO offer you will have to pay for shipping, i will get quote and we can work soemthing out..
Integra type R USDM Pistons and rods that's a 10.6 -1 CR, these are in good shape as far i can see, ill let the pictures judge that
lookin for $125 OBO
ITR dual valve springs and retainers, waitng to get the headwork done and when i do i will be emailing pictures $100 OBO

Gsr crankshaft- needs to be machined looking for $80
motor being taken apart







all cylinder walls are in great shape no damage at all!




heres the bill of sale to show i did pay for it,

if you you need any more pictures let me know, i will do my best to answer your questions

Thanks

 

Do you have paypal?

 

Block have the VIN number still?

 

X2^^^^^

Where are you located??

 

yes i have paypal,
i believe the viin n the block was scratched off but the its stamped b18c5 looks legit, was told it was from a 2000 type r

 

Canada, Alberta

 

ill see if i can get the block back form the machine shop tomroow, then ill post pics guys

 

HAHAHAHA

Nah brah, ***** Legit bro. I stripped the motor down so of course its legit.

 

Tempting

 

I wouldn't post stolen merchandise on a public forum man... but then again I wouldn't be in possession of a stolen motor to begin with. There's no reason to EVER scratch off a VIN number, unless it's stolen. But it can still be traced by the serial number below the engine code stamp. What's that number?

 

its not stolen, ill see if i can get a copy of the bill of sale.. i paid 1700 for it here locally, from a buddy who has 2 type r integras

 

wait i thought the vin was the number below the stamped b18c5, thats whats scratched off

 

i stripped it down to take it to the machine shop to have a short block put together got a phone call sayign the piston to wall clearence was 0.005
wiseco manufaturer recommendations was 0.0025, not selling stolen stuff

 

pics of dual valve springs and retainer alos pm me please

 

Listen, if the VIN tag is removed, and the serial number is scratched off, it's stolen. Period.

I just actually called the SD PD and had a block serial number run about a week ago. Well, a detective from auto theft called me back, and wanted all the info of the guy selling it. He informed me it was stolen, and that they don't play around with stolen engines. I'm assuming the guy selling it got arrested.

So, let me get that serial number so I can run it... since you're not worried about it being stolen.

 

wheres the number??

 

im very interested to see if it is stolen now... i still have the guys contct information and location

 

as soon as my valve seals get in adn i take the head to the amchine shop i will get you pictures thanks!

 

pmed

 

Look at the front of the block right above the oil pan in the middle. There should be a green vin plate. Does the block say B18C5 or B18C? If it says B18C5 then the vin plate should be there and if not it is defiantly stolen because there is no reason take it off unless it's hot. (Stolen or not with no vin plate the police consider it stolen.) If it says B18C then it's a JDM block and it won't have a vin plate and the only way to tell if it's GSR or Type-R is by the numbers that are "scratched off".

 

Not necessarily. Factory replacement blocks do not have VIN plates.

Craig - Who currently has a legit block in his car with no VIN plate

 

bump, bill of sale added to pictures

 

I didn't know that BUT if it is "scratched" off then more than likely it's hot because like I stated before there is NO reason to take it off unless you don't want someone tracking it down hence it's hot.

 

never heard of cops wanting to look under the hood of every car they pull over etc, and checking th vin on every part?
okay so good deal for anyone wanting to rebuild a type r motor for cheap, good start witht the block
believe wha you want but if theirs anyone out there who doesnt think a cop is gonna check all their mods ha tyhat never happens here but if you wanna buy into it its fine, cracking vtec youv made your point thank you!

 

No, but they still have serial numbers, and they also have an R-DOT stamped on the block. This one has the VIN tag snapped off, and the serial number scratched off.

Frankly I'm surprised a mod hasn't removed this yet, I'm pretty sure moving stolen parts on HT is frowned upon.