Will it fit in a 97 Civic HX Coupe?

 

LSD*

 

Google says yes, using the same mounts for an H22 swap. You should try searching first next time.

 

I tried googling it all i got was like youtube videos and head swaps, but i was at work and on my phone; forum was easier sorry for the bother.

 

I did some research i will need new axles, will the stock H22 axels work?

 

My brother in law just did his on the an ek coupe and you need the drivers side mount bracket for the h22 that's about it and for axles you need integra axles 94 on passenger and 93 on drivers side. You also need an accord halfshaft from a 93 female cause the male halfshaft is going to **** you off.

 

http://www.ebay.com/itm/96-00-Civic-...sories&vxp=mtr

http://www.horsepowerfreaks.com/part...ries_Swap/8880

So instead of these 333.00 above axles use integra axles?
I can get away with these?
http://www.ebay.com/itm/Yonaka-Honda...6679a7&vxp=mtr

http://www.ebay.com/itm/Yonaka-Honda...sories&vxp=mtr

 

What about the Dohc Vs Sohc?

 

Even with the sohc f22/23 they go in the same way.

 

Ok I was wondering if thered be additionals wires, im from sj too glassboro. Where u from? Small world lol.

 

I'm from vineland but for the wiring you need to extend the alternator wires that's it.

 

I'm considering dropping a f20b in my em2 (vp/dx) And stripping my whole interior and adding just the gauges aftmkt sparco and my sound system...
K20a3 was a option since I know someone selling one for 500.00 but then I realized its not the type R joint... Plus the f20b is under 3,000 with the ecu and matching trans, my question is has anyone done this swap on a em2 2004 and if so what else is necessary

 

Well the k20a3 can still be the real i vtec you just need to get a k20a head or you could look up how to convert the econo vtec k20a3 head to crackin vtec k20a3 head on google by switching the lma's vtec thingys.

 

Yeah but my swap needs to be a weekend job like wham bam thank you ma'am no time for audibles in this play