JustOneOrTwoPosts

I just got in contact with a place that does custom carbon fiber products and they wanted to know how much interest we could get for a custom timing belt cover for h22's. This was originally aimed for the h2b guys, but I figure other h guys would be interested too. The cover would be for those who run with no balance shaft gears (but if you are running them and still interested, voice your opinion) to make production easier/cheaper. Let us know if you would be interested, and things you would like to see. I want it as cheap as possible, so I suggested that it be made out of a flat sheet of aluminum, but I'm sure people would want it out of CF or Kevlar. He also wanted to know how much you would spend on one and be realistic. Hope you guys are interested and have good suggestions!

snobordboy

Is there anything out there like this for other engines, just to give a better idea of what it is?

SiR_Chris

It's pretty easy to make your own TB cover if you're happy with just a flat piece. I would be very interested in this if it also had sides that mated to the block.

AyO Deebo

i wouldnt mind aluminum cover im still got my balance shaft though. I wouldnt waste more than 50 bucks on a cover though

DA is best

iTrader: (1)

Yeah anything over 50 would be out of the question but are we talkin about a full cover or just the lower portion? In for aluminum

Jaime 91SiB18

JDM DOHC ZC

HeikDiesel

You guys really think you are going to pay less than 50 dollars for a custom piece of aluminum? lol

JustOneOrTwoPosts

only the people making the product can determine the cost of things. It mostly comes down to how much supply/demand there is. I was hoping the final costs would be less than $100. So everyone please vote and/or chime in when you can!