what you guys think ??

http://cokex.locash.ca/dp/

 

looks good wana make me one

Rob

 

sure.. i can get these made fairly cheaply ..

you provide the flange and pipping and i can get it made for about $150..

i'll need some templates tho.. like a drag dp, or revhard dp that exits out the driver side not passenger side like mine.. since most people have it that way.

 

no thanks i was just messing around, and allso, for me providing all the parts 150 is really high. I think i will just end up making my own.


Rob

 

$150 is high ?? everywhere else i see is like 2bills+

flange is like .. 12$ and U bend pipe is like 15$ .. so $177 .. seems cheap to me.. but its always cheaper to make your own .. i wouldv'e.. but i only have a mig no tig ..

i forgot to say shipped .. i'm not making any $$ off it .. so no big deal to me .. heh


[Modified by cokex, 1:15 AM 10/12/2002]

 

yeah i apreciate the offer, but i know its going to be a pain in the ***, i am going to make all my chargepipes so i might as well make my downpipe to, it will only cost me the parts.

thanks again


Rob

 

well the offer is for everyone .. not trying to force you ..

 

I had a shop do all my IC piping. They charged 200 for labor.

 

haha you got some of the JDM bends... looks good.

 

Nothing wrong with MIG welding a downpipe! I mean TIG is pretty and all, but I made my own downpipe with a CHEAP *** mig welder and $30 worth of parts in one evening. Held up for like 18 months no problems.