Hey guys, I have a problem and could use some help. I am putting an obd1 h22a ( purchased from a local shop) into my 1996 accord ex. Everything was going smooth with the instructions provided in the FAQ forum on here but now I have a few issues. The h22a came with an external coil dizzy(from obd1 h23) and I am lost for wiring here. I have tried to find some info on this but have just gotten more confused. The old dizzy plug on my obd2 f22b harness has 5 wires connected to it. I already ran the 4 wires from the drivers side of the block over to use with the obd1 dizzy. I am lost on where to pin the wires at on the obd1 dizzy plugs and I am completely lost on what to wire to the external coil plug. Any input here would be greatly appreciated. Thanks in advance.

 

I think that I figured out this wiring issue. I haven't tried to start it yet, that will happen tomorrow. I will post what happens and some pics of the swap.

 

Motor is in just waiting for my last mount to come from honda.... wiring is done, also waiting on my custom power steering line. Should be running this week , well i hope anyway.