tryin to figure out some wires, its a LSV with obd1, have NO idea what harness this guy used, and very confused.

few pics



He told me the red wire is for vtec, so green plug not used, the red wire running to the bolt is a GROUND? im asuming for vtec?


thermo housing brown plug, not hooked up at all? i pulled off THIS plug in next pic, Rad rans come on when gets hot, and i do have coolant temp reading on the data log. (when data log works)



no idea where to hook this up to, was on the brown plug (thermo housing)


And these two dang wires, that THIS dude had hooked up to AIT sensor, which was WRONG, i found ait wires and hooked it up, now i have a ait reading, but i still have these two wires i have no idea where they go, was THINKIN to the brown plug? because when i ground out the wire thats getting a 12v signal, it turns the rad fan on? other wire, asuming its some kinda of ground wire, no signal, no ohms.

any help PLEASE

thanks guys

just tryin to get my buddys car running good, Its been such a HEAD ace since we bought it. but its comming along. just a WIRE MESS

 

O YEA and his ELD wire from the ecu, is not hooked up into the harness its just cut at the ecu plug.... why?

and should we hook this up?

 

no help?

 

knowone?