driveshaft legnths required
Thread Starter
Honda-Tech Member
Joined: Mar 2006
Posts: 571
Likes: 0
From: uk, uk
driveshaft legnths required
lo guys.
running a b16a2 in my crx VT chassis (no swap kit here its b series for m the factory) jsut installed a hydro box/pedal etc from a delsol SiR (same as your b series delsol si?)
anyway the shafts on my drivers side are binding (they are to long)
my crx manual says the cable vt shafts are 463 to 468mm from the factory. how long are the delsol ones?
just trying to figure out what main shaft i need to run
running a b16a2 in my crx VT chassis (no swap kit here its b series for m the factory) jsut installed a hydro box/pedal etc from a delsol SiR (same as your b series delsol si?)
anyway the shafts on my drivers side are binding (they are to long)
my crx manual says the cable vt shafts are 463 to 468mm from the factory. how long are the delsol ones?
just trying to figure out what main shaft i need to run
Thread
Thread Starter
Forum
Replies
Last Post
eh3Ming
Transmission & Drivetrain
2
Dec 26, 2013 02:05 PM
shortstopNE
Honda CRX / EF Civic (1988 - 1991)
2
Jul 7, 2009 08:40 PM
sonic47
Southern California (Sales)
24
May 4, 2009 02:25 PM
crxjester8
Honda CRX / EF Civic (1988 - 1991)
14
Aug 20, 2005 07:02 AM