I have two remaned integra type r calipers only mounted no miles brand new centric premium rotors and brand new hawk hps pads. Rotors are 4x100 they are mini cooper rotors.

Im selling this set because i have a set of 15x7 rpf1's and they wont fit under the wheel. So i decided to tryin grind down the caliper bracket where it was touching the wheel and ended up going to deep on the driver side bracket and got down to the slider bolt (pictured) caliper is still perfect. Passenger bracket was never touched still in plastic.


-DS caliper and bracket will need new bracket
-PS caliper and bracket still in plastic and box
-Hawk hps pads only taken out to test fit
-D and P mini rotors one is still in plastic other was only taken out to test fit

taking offers want them gone.

Any qustions
Text me at 217-619-6748

Thanks, Dustin

 

I pretty much have the same setup, under LS meshies and legend two piston calipers. I'm not sure what the offset on 15x7 rpf1's are but if you're on 23T brackets it should work without a problem.

Bump for a good price and parts, I'd buy if I didn't have mine already.

 

pm'd

 

You got the rotors from a base 08 mini, yeah?

 

On the rpf1s the barrel is completely flat as it gets towards the face of the wheel it graudally gets small. My wheels are a 35mm offset.

 

Pm replied. also on the rotors they are 07 base mini rotors probably exactly the same as the 08s but i just bought 07.

 

bump.

 

ttt

 

bumpers!

 

I have 16x8 +38 RPF1's that fit on there without a problem.. thats weird.

 

Yeah they fit fine under 16's but 15's wont clear the caliper enough.

May even trade for 94-01 integra parts just let me know what you have.

 

bump

 

TTT

 

I know that you are trying to sell your calipers.

I have a front bracket from an accord, which I can give you, to replace the one that you have ground down.

PM me

 

are you willing to sell me just the pads? i think i glazed my set of hawk hps when i bedded them in :3

 

Was going to buy, then I saw they don't fit under 15x7 RPF1s. Time to sell them I guess.

 

 

Thanks for the bump. Kenny if your still looking for pads Im sure we could work somethin out.

 

**** man....now you reply! i just ordered a set of bendix CT-3 on amazon. how much you willing to sell me them for?

 

Lol sorry about the delay been busy lately i paid something around $68 for them before shipping.

 

Bump someone buy these or trade me some Integra parts there in boxes in my closet.

 

are the slide pins stuck or no? I might be interested in the calipers alone (no brackets)

 

No slider pins are free and have fresh grease in them their renamed so pretty much brand new.

 

How much are you willing to sell the calipers for?

 

Bump someone shoot me some offers on this set up as a whole. Just laying around unused still in boxes.