HUGE F.S. K20 swap, SSR, H22, Turbo kit, etc!!!
Thread Starter
Joined: Sep 2002
Posts: 7,603
Likes: 2
From: Los Angeles, CA
HUGE F.S. K20 swap, SSR, H22, Turbo kit, etc!!!
Cleaning out storage and have way too much stuff that I need to get rid of. Ive been a member and good seller on here for a very long time. Search my user name for hundreds of vouches (mainly in the TX classifieds). Everything can be picked up around Hermosa Beach, Redondo, or Torrance areas. Thanks.
PICS of everything will be posted on 2nd post!!!!!!!!!!! I will update as soon as I go through the rest of my boxes in storage
1. Parting out now!!! K20z3 from 07 Civic SI. Motor is now partially disassembled. Will need a full rebuild and at minimum a new VTC actuator, exhaust cam, and 1st journal (at timing belt cover). Motor was not maintained, had oil starvation to the head and the exhaust cam heated and wore the 1st journal. Will include almost everything EXCEPT Transmission, ignition coils, alternator, exhaust mani, and a few other things. Comes with new timing chain and tensioner, as well as the old ones. Has clutch, flywheel, intake mani, injectors, block, head, chain, tensioner, cover, valve cover, ECU, engine wiring harness, water pump, idler pulley, etc. AS IS. Parting everything out now. Make offers on what you need.
-- Intake mani, throttle body, and wiring harness sold
2. H22 cylinder head. Pretty fresh from machine shop. Has been resurfaced, hot tanked, and reassembled with new valve seals. Has 1 replacement valve but I can also supply a factory valve if that is your preference. Comes with Valve cover, cam caps, cams, gears, full valve train, vtec solenoid, coolant temp sensor, and a few other things. SOLD!!!!
3. SSR Type C's. OG White and Completely original with original stickers and valve stems. 15x7 +42 offset with 205-50-15 Falken Ziex 512's. I searched for years to find these and still not sure if I want to sell them. Will sell for $1150 FIRM w/tires or $1050 w/out.
4. Maxrev tubular b-series manifold with custom 3" 5 bolt downpipe and dumptube. $385
5. Custom 2.5" charge pipes with Greddy large fmic (type 24) and HKS type r bov. Intercooler has some cosmetic damage, but holds pressure perfect. My bone stock LS made 400whp/300wtq on this setup on 93 octane. Comes with all silicone couplings and t-bolt clamps and vacuum hose for bov. $525
6. STR sheetmetal intake manifold for LS motor with Hondata heat gasket. Fuel rail holder has to be tack welded back in place. (pictured below) Throttle body not included. $275
7. MSD 6al w/blaster coil mounted in custom aluminum tray (mounts in factory battery location) with OBD1 LS distributer w/ MSD cap and coil wire. $400
8. Hondata socketed obd1 pr4 LS ecu. $115
9. 92-95 Civic hatch manual window black door panels with black tweed inserts. Super dusty in pics, a few blemishes by edges, come with speaker covers but no door handles or pockets. $85
10. 96-00 Civic ex,dx,lx a/c lines. All lines in engine bay. $75
11. 03 Civic sedam oem drk gray floor mats. Great condition but has a heel wear mark on driver mat. $60
12. Brand new MAC 20 ton shop press. Still in boxes, never opened, only moved around to a couple different storage places. Retails for 553.99 + tax will sell for $450. Extremely heavy so will need to be picked up in a truck.
13. MAC engine support brace. Bought to use for doing transmissions on rsx's and newer civics where you drop the subframe. Barely used, maybe twice if that. $155
14. 92 Civic CX shell. I really dont think i'm going to sell this but I'm gonna take offers and if something is decent enough I might take it. I've owned this for 12 years, clean TX title, and has been torn apart since 2005. Has 71k original miles, never been in any accidents at all. Has been h-swapped since 2000 and is the original milano red. READ CAREFULLY!!!! This car is COMPLETELY apart. The corner windows and windshield are still on the car as well as steering column to move around. I have almost every single bolt, bracket, glass, electrical, etc for this car organized in boxes except for brake lines. There are a couple dings/scratches on the body and has absolutely no interior. I have a complete Ken's custom chassis 10 point cromoly cage that needs to be welded in if wanted. And full (disassembled) H-swap can be included if wanted. Car was disassembled for cage and paint but got carried away with many other projects and never finished. Make reasonable offer.
PICS of everything will be posted on 2nd post!!!!!!!!!!! I will update as soon as I go through the rest of my boxes in storage
1. Parting out now!!! K20z3 from 07 Civic SI. Motor is now partially disassembled. Will need a full rebuild and at minimum a new VTC actuator, exhaust cam, and 1st journal (at timing belt cover). Motor was not maintained, had oil starvation to the head and the exhaust cam heated and wore the 1st journal. Will include almost everything EXCEPT Transmission, ignition coils, alternator, exhaust mani, and a few other things. Comes with new timing chain and tensioner, as well as the old ones. Has clutch, flywheel, intake mani, injectors, block, head, chain, tensioner, cover, valve cover, ECU, engine wiring harness, water pump, idler pulley, etc. AS IS. Parting everything out now. Make offers on what you need.
-- Intake mani, throttle body, and wiring harness sold
2. H22 cylinder head. Pretty fresh from machine shop. Has been resurfaced, hot tanked, and reassembled with new valve seals. Has 1 replacement valve but I can also supply a factory valve if that is your preference. Comes with Valve cover, cam caps, cams, gears, full valve train, vtec solenoid, coolant temp sensor, and a few other things. SOLD!!!!
3. SSR Type C's. OG White and Completely original with original stickers and valve stems. 15x7 +42 offset with 205-50-15 Falken Ziex 512's. I searched for years to find these and still not sure if I want to sell them. Will sell for $1150 FIRM w/tires or $1050 w/out.
4. Maxrev tubular b-series manifold with custom 3" 5 bolt downpipe and dumptube. $385
5. Custom 2.5" charge pipes with Greddy large fmic (type 24) and HKS type r bov. Intercooler has some cosmetic damage, but holds pressure perfect. My bone stock LS made 400whp/300wtq on this setup on 93 octane. Comes with all silicone couplings and t-bolt clamps and vacuum hose for bov. $525
6. STR sheetmetal intake manifold for LS motor with Hondata heat gasket. Fuel rail holder has to be tack welded back in place. (pictured below) Throttle body not included. $275
7. MSD 6al w/blaster coil mounted in custom aluminum tray (mounts in factory battery location) with OBD1 LS distributer w/ MSD cap and coil wire. $400
8. Hondata socketed obd1 pr4 LS ecu. $115
9. 92-95 Civic hatch manual window black door panels with black tweed inserts. Super dusty in pics, a few blemishes by edges, come with speaker covers but no door handles or pockets. $85
10. 96-00 Civic ex,dx,lx a/c lines. All lines in engine bay. $75
11. 03 Civic sedam oem drk gray floor mats. Great condition but has a heel wear mark on driver mat. $60
12. Brand new MAC 20 ton shop press. Still in boxes, never opened, only moved around to a couple different storage places. Retails for 553.99 + tax will sell for $450. Extremely heavy so will need to be picked up in a truck.
13. MAC engine support brace. Bought to use for doing transmissions on rsx's and newer civics where you drop the subframe. Barely used, maybe twice if that. $155
14. 92 Civic CX shell. I really dont think i'm going to sell this but I'm gonna take offers and if something is decent enough I might take it. I've owned this for 12 years, clean TX title, and has been torn apart since 2005. Has 71k original miles, never been in any accidents at all. Has been h-swapped since 2000 and is the original milano red. READ CAREFULLY!!!! This car is COMPLETELY apart. The corner windows and windshield are still on the car as well as steering column to move around. I have almost every single bolt, bracket, glass, electrical, etc for this car organized in boxes except for brake lines. There are a couple dings/scratches on the body and has absolutely no interior. I have a complete Ken's custom chassis 10 point cromoly cage that needs to be welded in if wanted. And full (disassembled) H-swap can be included if wanted. Car was disassembled for cage and paint but got carried away with many other projects and never finished. Make reasonable offer.
Last edited by JDMH22HATCH; Mar 17, 2012 at 06:35 PM.
Trending Topics
Thread Starter
Joined: Sep 2002
Posts: 7,603
Likes: 2
From: Los Angeles, CA
Thread Starter
Joined: Sep 2002
Posts: 7,603
Likes: 2
From: Los Angeles, CA
Re: HUGE F.S. K20 swap, SSR, H22, Turbo kit, etc!!!
Sorry I don't know what RBC means?
Make me an offer. Not wanting to part out, but if the offers right i will
Sorry not selling the lip. Probably keeping the car so it either goes as a whole or I'm keeping it
Come get it!!!!
I can do $140 for it
Make me an offer. Not wanting to part out, but if the offers right i will
Sorry not selling the lip. Probably keeping the car so it either goes as a whole or I'm keeping it
Come get it!!!!
I can do $140 for it
