Hey guys, new to this forum and could use some help!
I'm at the tail end of making a lsvtec in an ek sedan and am a little confused about the intake manifold.
The b16 im is a little different in comparison to the ls im.
1. On ls valve cover there is a 1 inch opening that has vacuum line to im but vtec valve cover doesnt have it, what happens with that port on the im?

2. Directly on top of ls im there is a sensor with a vacuum line coming off it but no sensor on b16 im however there is a vacuum line, do i just put the existing line on that one minus the sensor?

3. there is no opening for the iat sensor on b16 im, what should i do with the iat sensor?

4. on the backside of the b16 im on the driver side there is a small vacuum line port there which isn't on the ls im, what goes there?

Any help would be greatly appreciated!
Cheers

 

Anyone?

 

think thats the pcv valve post picture
possably puge solinoid pic ? what year are the motors obd0,obd1,obd2a,obd2b
the sensor goes in the intake air tube
cruise control just cap it

 

I will post pics as soon as I can! Do I have to use photobucket or something like it to post pics on this forum also?

 

yes you do

 

purge solenoid isn't needed for the b16 and if i remember correctly he is correct about the pcv valve in the ls valve cover and on the b16 it's in the manifold