FS: Blox turbo manifold, custom downpipe closed dumptube, wg elbow, spoolin perf
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 650
Likes: 0
From: Bayshore, NY
FS: Blox turbo manifold, custom downpipe closed dumptube, wg elbow Now on Ebay
Now available on ebay with a very low reserve. Don't be shy...
http://www.ebay.com/itm/300653521009...witem=&vxp=mtr
for sale is a Blox turbo manifold, custom built downpipe / closed dumptube combo, and wastegate elbow
The downpipe and dumptube were fabricated for a t3/t4 turbo mounted to a log manifold (blox), using the wastegate elbow (with a 38mm wg)
Blox manifold is used with some signs of wear. there are no cracks or damage to the flanges
Downpipe was fabricated by honda-tech sponsor 'spoolin performance'. It is NEW, never used. 4 bolt, Stainless steel, TIG welded, 2.5in flared to 3in. CLOSED Dumptube (short section of tube slides out as shown). 3in Flex section. Two o2 bungs (one for tuning with wideband o2 sensor, another for narrowband)
Stainless steel wastegate elbow - new - also fabricated by Spoolin Performance
this system IS both A/C and power steering compatible. You will not need to remove your air conditioning or power steering.
Also included (although not shown) exhaust studs from ATP turbo to mount it to the head, new t3 turbo gasket, 2 new 38mm wastegate gaskets
I would consider parting out individual items, but would prefer to sell as a whole given the system functions as a whole
I paid well over $800 for all of the above items
ebay id is 'djgurgla' to confirm i'm an honest seller
please reply to the thread or pm with any questions
http://www.ebay.com/itm/300653521009...witem=&vxp=mtr
for sale is a Blox turbo manifold, custom built downpipe / closed dumptube combo, and wastegate elbow
The downpipe and dumptube were fabricated for a t3/t4 turbo mounted to a log manifold (blox), using the wastegate elbow (with a 38mm wg)
Blox manifold is used with some signs of wear. there are no cracks or damage to the flanges
Downpipe was fabricated by honda-tech sponsor 'spoolin performance'. It is NEW, never used. 4 bolt, Stainless steel, TIG welded, 2.5in flared to 3in. CLOSED Dumptube (short section of tube slides out as shown). 3in Flex section. Two o2 bungs (one for tuning with wideband o2 sensor, another for narrowband)
Stainless steel wastegate elbow - new - also fabricated by Spoolin Performance
this system IS both A/C and power steering compatible. You will not need to remove your air conditioning or power steering.
Also included (although not shown) exhaust studs from ATP turbo to mount it to the head, new t3 turbo gasket, 2 new 38mm wastegate gaskets
I would consider parting out individual items, but would prefer to sell as a whole given the system functions as a whole
I paid well over $800 for all of the above items
ebay id is 'djgurgla' to confirm i'm an honest seller
please reply to the thread or pm with any questions
Last edited by DJ Gurgla GSR; Jan 21, 2012 at 03:18 PM.
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 650
Likes: 0
From: Bayshore, NY
Re: FS: Blox turbo manifold, custom downpipe closed dumptube, wg elbow, spoolin perf
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
99B16Si
Florida (Sales)
2
Nov 17, 2006 06:27 AM
Almost new B-series non a/c Lovefab SST ramhorn turbo manifold plus 3 inch wastegate merged downpipe
program
Northern California (Sales)
55
Oct 3, 2006 04:51 PM
99B16Si
Classifieds: Forced Induction
4
Sep 5, 2006 05:25 PM
