2000 LS Longblock (bent valves) $200 bucks
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: san bernardino, ca, USA all the way
Posts: 2,378
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
Have a 2000 LS longblock w/vin and paperwork.pretty sure belt tensioner needs to be replaced, belt jumped about 9 teeth so pretty sure it has bent valves. Swapped it out for a B20b so no need for it. Approximately 140k on it.
200 firm
Also have a head with valves for an extra 20 bucks.
Located in san bernardino. Near the 10 & 215 freeway
200 firm
Also have a head with valves for an extra 20 bucks.
Located in san bernardino. Near the 10 & 215 freeway
Last edited by cup cake; 12-15-2011 at 03:40 PM.
#6
Honda-Tech Member
iTrader: (20)
Join Date: Dec 2007
Location: so cal, CA, USA
Posts: 9,187
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
Hmmm..i thought LS wouldnt get bend valves if timing belt snap or teeth jumped. Ive repleced a few timing belts from previous clients who have snap their belts and none of the valves have bend.
#7
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: san bernardino, ca, USA all the way
Posts: 2,378
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://honda-tech.com/forums/images/icons/icon1.gif)
I thought they all did but he did try to crank it a lot, he said after it jumped. But either way 220 with the replacement head with good valves or 200 without. Just need it gone. Dont really feel like taking it apart to find out
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post