Well, I've been piling up random parts in the garage/in my closet for a while now, and I'm looking to move'em out!
I'd rather not toss these in the trash, nor will my local scrap yards give me cash for these...bleh XP
I'm making an effort to sell these below retail on Ebay/Craigslist etc.
I don't REALLY need the money, but I know these parts can be used/re-used by the folks here at Honda-Tech.



So, preferred method is Paypal unless buyer can/is willing to meet in person, in which case cash is preferred to keep the IRS out of things, ya know?
XD
Located in Flower Mound, South of Denton, North of Dallas, btw
Otherwise, shipping costs will be figured in depending on the buyer's shipping location.

First up, a used cylinder head from a 98 Civic LX. Has 122k miles on it and has been sitting in my closet for about a year.
Camshaft and valve springs have light corrosion but I'm able to wipe them clean with a rag so it's just surface rust from sitting in my closet. Good for a budget rebuild. Valve cover bolt was broken off in one hole. Will need to be drilled out, but I don't wanna risk damaging it cuz I really have no idea how. XP
$60 obo
Prefer for buyer to see it in person so as to save on shipping ^^;







D16Y7 Intake Manifold from a 98 Civic
For Automatic Transmission
Cleaned it of carbon inside and out. Mounting surfaces are straight and clean. Tubes unbent and intact. Does not come with throttle body or hoses.
$20 obo



(cat's not for sale though ^^; )

Used VTEC Solenoid D16Y8 + Pressure Sensor with all wire connections.
For those that wanna do a Mini-Me Swap or their old VTEC solenoid has kicked the bucket. Cleaned it out as well as I could.
Recommend replacing gasket/screen before installation
$30 obo




Refurbished D16Y7 Fuel Injectors x 4
Still in the shipping plastic.
Comes with new gaskets/cleaned internals/replaced pintels.
I'll include the manufacturer info with them as well. (or here if needed)
They're out of warranty by the months, but they've never been installed since I've had them.

$60 obo for all four

Used D16Y8 Fuel injectors x 4
Unknown miles
No refurbished parts but good for a budget replacement
$40 obo for all four


Used D16Y7 fuel injectors x 4
Taken off of my Civic LX @ 125k miles
Worked just fine when removed with no leaks/malfunctions
$30 obo for all four


New D16Y8/Y7 oil pressure sensor
Still have box and packing paper, never been installed.
This can easily be mailed in an envelope.
$10 obo


Ebay Adjustable Cam Gear with 3 cam gear keys
Was gonna use this on my Civic before I decided on other methods
Never been installed.
Adjusting mechanism works/has degree markings.
Genuine OEM cam gear keys.
$15 obo for all


ECU pins for OBD2-A or B Civic ECU's. Have pins for all plugs big and small. Can mail any number you need in an envelope. These are getting tougher to find without having them custom made. Please specify large or small pins needed. Large pins are in short supply.
50 cents per pin with at least 3 inches or more of wire a piece.
Perfect for mini me swaps for wiring knock sensors or VTEC Solenoids!



96-98 Civic LX grill/chrome OEM
Lightly used with a scuff mark on the black plastic top. Other than the scuff mark, everything else is nice and clean. This was replaced on my car by Bankston Collision Center following a fender bender before I switched to my current grill.
$10 obo


Tan seat side panels and seat adjuster handle cover from 97 Integra.
For those looking to go with a tan interior or those that pick up some Tan Teg seats and want the panels to match...or those that wanna do a contrast interior. ^^;
Driver's side and passenger side.
Comes with all hardware.
$20 obo for the whole set.


Driver's side and Passenger side Seat rails from the same 97 Integra.
Could do with some cleaning up, but the rails all worked before I swapped the seats into my Civic.
Driver's side seat belt indicator intact and functioning.
$30 obo for whole set.
Comes with all hardware.


And now for something random. An E-0945 K&N air filter for a 2000 F150 V8
Some customer that came into our shop didn't want his anymore and exchanged it for a paper one (why I have no idea XD; )
But I grabbed it up from the trash and cleaned it up. It's not gonna get much cleaner. The gasket is coming loose but I can fix that before shipping. ^^
Brand new they're like $50, but I'll ask $25 obo for this one.



Soooo yeah....shoot me a PM if you're interested.
I'll only keep this stuff up until January or so, then it's either back in the closet, off to a machine shop or injector shop, or off to the scrap yard!

Soon to add more stuff!

 

Bump for addition of a working MAP sensor off a D16Y8 Throttle Body
$15 obo
(pic to be added soon)

 

What part of TX you in??

 

Oh derp, that'd be helpful to say, eh?
^^;

Located in Flower Mound, South of Denton, North of Dallas
^^

 

Bump ^^

 

Bump
(wish I knew how to change the thread title instead of the post title)
XD;

 

Bump

Header/downpipe, Air Intake Temp Sensor, and both ECU's are currently being reserved for a potential buyer.
Everything else is still available.
Heh, I'm actually toying with the idea of having the head rebuilt with new springs and seals as well as cleaned up and having the warpage (if any) checked if it'll increase the sale value or reliability a little bit.

 

Bump for update:

Sold both ECU's, the Air intake temperature sensor, and the Header/Downpipe
Adjusted price of seat rails to $35 for the whole set
Adjusted price of Civic Seats to $35 a piece

Soon to add used black Spyder Projection lens headlights and Spyder black euro tail lights to the sales list for $45 for the whole set (front, back, and all sides)
Tail lights for the sedan.

 

Bump ^^

 

Bump for a darn good seller, pm sent for pins

 

Thanks!
PM sent!

LOL I should probably get some pix of the headlights and MAP sensor up soon XD;

 

Update!
Donated the seats cuz of no offers XD;
Yay tax write-offs!

 

Back from the dead bump!!