I've been trying to find a picture of the back of a cluster so I could order replacement bulbs & LEDs for the speedometers/tach, and no luck. So i took a picture of my recently acquired '90-91 CRX Si cluster I plan on putting in my '91 DX.

Now, I don't know which bulbs work and which ones don't, so i am just replacing them all. I would like to use regular incandescent bulbs in the warning lights and turn signals, etc, and the 5-way LEDs for the speedometer and tachometer.

Could someone please tell me what bulbs go where on these pictures? I'll gladly make a how to for dummies with the results

 

umm, idk much about changin the bulbs, but i would have to say where all the holes are

 

I would like to know as well cause I want to change the top bulbs as well but when I took them to autozone they didn't have them and no one knew where to get them so I am interested in finding out this info..

 

Here is a link to where you can buy the led twist bulbs for the cluster. To find out what light does what just get a small flash light and take the bulb out and shine the light in there and see what it lights up. That way you dont have to waste money on lots of bulbs and use like 5 or 6 of them

http://www.superbrightleds.com/cgi-b...nstrument.html

 

Thank you I appreciate the info.

 

I've had good luck with most of the T3 Led bulbs on Ebay. And they are cheap!

I have tried blue, green, and white with the best results for illumination and clarity being the white T3 leds.