DC4KiD's For Sale/Trade & WTB Thread
Thread Starter
Honda-Tech Member
iTrader: (4)
Joined: Nov 2003
Posts: 21,728
Likes: 0
From: Oakland, CA
Last Updated: 8.10.2016
- PM me if you have any questions or concerns
Things for sale/trade:
- 1994-2001 Integra 2dr axle-back muffler (un-cut) with OEM chrome LS tip - $40


- 2 Rota Slipstreams 15x6.5 5x114.3 freshly powder-coated in semi-gloss black. One wheel has a minor gouge that was coated over. - $160 for both



- Brand new (no packaging), never installed Buddy Club turbo timer. Black box has minor scuffing. - $80

- 2 Hoosier QTP bias ply drag tires 26x9x15 on 15x7 5x114.3 Rota Slipstreams. Only 2 passes down the 1/4 mile on them - $400 for the pair


- 4 15" 5x114.3 USDM ITR wheels freshly powder-coated in "auto gray" with center caps. Center caps are a little lighter shade than the wheels (not too noticeable). One wheel had some scrapes/gouges that were coated over. - $400 for the set.






- Used set of 4 B16A2 PR3 81.00 MM pistons with rods. Will include new ring set as shown. - $60


- B-Series 65mm Edelbrock throttle body. Missing idle adjustment screw (can just use one from a stock TB), throttle plate sticks (needs adjustment). Comes with calibrated TPS. - $50


- OBD1 B16 intake manifold painted black. No sensors attached. - $30
- PM me if you have any questions or concerns
Things for sale/trade:
- 1994-2001 Integra 2dr axle-back muffler (un-cut) with OEM chrome LS tip - $40


- 2 Rota Slipstreams 15x6.5 5x114.3 freshly powder-coated in semi-gloss black. One wheel has a minor gouge that was coated over. - $160 for both



- Brand new (no packaging), never installed Buddy Club turbo timer. Black box has minor scuffing. - $80

- 2 Hoosier QTP bias ply drag tires 26x9x15 on 15x7 5x114.3 Rota Slipstreams. Only 2 passes down the 1/4 mile on them - $400 for the pair


- 4 15" 5x114.3 USDM ITR wheels freshly powder-coated in "auto gray" with center caps. Center caps are a little lighter shade than the wheels (not too noticeable). One wheel had some scrapes/gouges that were coated over. - $400 for the set.






- Used set of 4 B16A2 PR3 81.00 MM pistons with rods. Will include new ring set as shown. - $60


- B-Series 65mm Edelbrock throttle body. Missing idle adjustment screw (can just use one from a stock TB), throttle plate sticks (needs adjustment). Comes with calibrated TPS. - $50


- OBD1 B16 intake manifold painted black. No sensors attached. - $30
Last edited by DC4KiD; Aug 11, 2016 at 05:36 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post





