DC4KiD's For Sale/Trade & WTB Thread
11-01-2011, 09:34 AM
#1
DC4KiD's For Sale/Trade & WTB Thread
Last Updated: 8.10.2016
- PM me if you have any questions or concerns
Things for sale/trade:
- 1994-2001 Integra 2dr axle-back muffler (un-cut) with OEM chrome LS tip - $40
- 3" aluminum tubing/elbow with coupler as shown. Was used in a turbo kit as shown below (velocity stack NOT included) - $15
- 2 Rota Slipstreams 15x6.5 5x114.3 freshly powder-coated in semi-gloss black. One wheel has a minor gouge that was coated over. - $160 for both
- Brand new (no packaging), never installed Buddy Club turbo timer. Black box has minor scuffing. - $80
- 2 Hoosier QTP bias ply drag tires 26x9x15 on 15x7 5x114.3 Rota Slipstreams. Only 2 passes down the 1/4 mile on them - $400 for the pair
- 4 15" 5x114.3 USDM ITR wheels freshly powder-coated in "auto gray" with center caps. Center caps are a little lighter shade than the wheels (not too noticeable). One wheel had some scrapes/gouges that were coated over. - $400 for the set.
- B-Series partial turbo kit (Drag intercooler, Blox/EMUSA cast manifold, matching 2.5" down-pipe, Spoolin' Performance WG elbow, Spoolin' Performance WG dump-tube, 2.5" adjustable test pipe, Garrett T3 turbo) - $500 for everything, or individually priced as posted below.
- Drag Intercooler - $60
- Garrett T3 turbo (unsure of exact specs, should be good for 350 HP), fresh rebuild with new shaft bushings, compressor and exhaust seals, thrust bearing & blow-by shield/cup. No bends or chips on fins. A little dirty, but zero miles since rebuild. - $300
- 2.5" adjustable test pipe - $30
- 2.5" 5-bolt down pipe (has 3" v-band flange welded onto 2-bolt flange, can be cut off) - $140
- Spoolin' Performance 38mm 2-bolt WG dump-tube. I had to cut it because it was too long and hitting my charge piping. - $40
- Blox/EMUSA B-Series cast iron manifold with Spoolin' Performance WG elbow - $150
- Used set of 4 B16A2 PR3 81.00 MM pistons with rods. Will include new ring set as shown. - $60
- B-Series 65mm Edelbrock throttle body. Missing idle adjustment screw (can just use one from a stock TB), throttle plate sticks (needs adjustment). Comes with calibrated TPS. - $50
- OBD1 B16 intake manifold painted black. No sensors attached. - $30
Sold Items
- PM me if you have any questions or concerns
Things for sale/trade:
- 1994-2001 Integra 2dr axle-back muffler (un-cut) with OEM chrome LS tip - $40
- 3" aluminum tubing/elbow with coupler as shown. Was used in a turbo kit as shown below (velocity stack NOT included) - $15
- 2 Rota Slipstreams 15x6.5 5x114.3 freshly powder-coated in semi-gloss black. One wheel has a minor gouge that was coated over. - $160 for both
- Brand new (no packaging), never installed Buddy Club turbo timer. Black box has minor scuffing. - $80
- 2 Hoosier QTP bias ply drag tires 26x9x15 on 15x7 5x114.3 Rota Slipstreams. Only 2 passes down the 1/4 mile on them - $400 for the pair
- 4 15" 5x114.3 USDM ITR wheels freshly powder-coated in "auto gray" with center caps. Center caps are a little lighter shade than the wheels (not too noticeable). One wheel had some scrapes/gouges that were coated over. - $400 for the set.
- B-Series partial turbo kit (Drag intercooler, Blox/EMUSA cast manifold, matching 2.5" down-pipe, Spoolin' Performance WG elbow, Spoolin' Performance WG dump-tube, 2.5" adjustable test pipe, Garrett T3 turbo) - $500 for everything, or individually priced as posted below.
- Drag Intercooler - $60
- Garrett T3 turbo (unsure of exact specs, should be good for 350 HP), fresh rebuild with new shaft bushings, compressor and exhaust seals, thrust bearing & blow-by shield/cup. No bends or chips on fins. A little dirty, but zero miles since rebuild. - $300
- 2.5" adjustable test pipe - $30
- 2.5" 5-bolt down pipe (has 3" v-band flange welded onto 2-bolt flange, can be cut off) - $140
- Spoolin' Performance 38mm 2-bolt WG dump-tube. I had to cut it because it was too long and hitting my charge piping. - $40
- Blox/EMUSA B-Series cast iron manifold with Spoolin' Performance WG elbow - $150
- Used set of 4 B16A2 PR3 81.00 MM pistons with rods. Will include new ring set as shown. - $60
- B-Series 65mm Edelbrock throttle body. Missing idle adjustment screw (can just use one from a stock TB), throttle plate sticks (needs adjustment). Comes with calibrated TPS. - $50
- OBD1 B16 intake manifold painted black. No sensors attached. - $30
Sold Items
Last edited by DC4KiD; 08-10-2016 at 05:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post
civicdragger818
Classifieds: Forced Induction
1
07-30-2004 09:04 AM
