FS- B-Series DOC Topmount/Turbo Kit. GSR Head. Built Block & More!!!
Thread Starter
Honda-Tech Member
Joined: Apr 2010
Posts: 685
Likes: 1
From: Wisconsin
FS- B-Series DOC Topmount/Turbo Kit. GSR Head. Built Block & More!!!
Well, its close to that time to start to build over the winter. Looking to get rid of some stuff for some funds, extra parts, ect. So here we go.
First off is the Turbo parts. Still on my car! Once I have buyer I will take off. You can see it in action.
Looking to sell all togather!!
-DOC Top Mount (t3 44mm vband flanged) Got it the spring.
-Godspeed 60-1 Turbo (Less that 1000 miles) 5 Bolt flange to Vband adapter!!
-Custom Made 3" DP with O2 bung for tuning and Flex Pipe. Vbanded Both ends.
-Custom Madish Dumptube, boogery welds but it works!
-Stock GSR Tapped Oil pan
-4an Feed line with restrictor.
-Return line (-10an)
- Might be some more stuff, thats all i can think of right now.
- Turbo Kit made 364whp 250ft @ 10psi on a stock GSR Block.
- Looking for $1000
-Willing to Sell Manifold, Downpipe, Dumptube as a set.
-$900
Next
- GSR Head. Has stock intake manifold, valve cover. Just needs cams.
SOLD
-SEMI Built GSR Block
- 81.5mm 9.5:1 SRP Pistons. Eagle Rods. ACL Rod bearings and rings. ARP Main Studs. Pistons and rods were slightly used before putting them into this block. Block is FRESH from weaver! Still in the wrapping!
SOLD
Odds and Ends
-I have Crower rods for a GSR
-Looking for 300
-Im sure I will think of more later.
In the Near Future
-Stock GSR Block. I made 364whp on this block. Did compression test before the tune, 210psi accross the board. 113000 Miles on the block, 5000 Miles since its been turboed.
- Looking for $350
- And there will probably be more!!
If interested in anything please text 6082357201. Pick Up only.
Text for PICS!
First off is the Turbo parts. Still on my car! Once I have buyer I will take off. You can see it in action.
Looking to sell all togather!!-DOC Top Mount (t3 44mm vband flanged) Got it the spring.
-Godspeed 60-1 Turbo (Less that 1000 miles) 5 Bolt flange to Vband adapter!!
-Custom Made 3" DP with O2 bung for tuning and Flex Pipe. Vbanded Both ends.
-Custom Madish Dumptube, boogery welds but it works!
-Stock GSR Tapped Oil pan
-4an Feed line with restrictor.
-Return line (-10an)
- Might be some more stuff, thats all i can think of right now.
- Turbo Kit made 364whp 250ft @ 10psi on a stock GSR Block.
- Looking for $1000
-Willing to Sell Manifold, Downpipe, Dumptube as a set.
-$900
Next
- GSR Head. Has stock intake manifold, valve cover. Just needs cams.
SOLD
-SEMI Built GSR Block
- 81.5mm 9.5:1 SRP Pistons. Eagle Rods. ACL Rod bearings and rings. ARP Main Studs. Pistons and rods were slightly used before putting them into this block. Block is FRESH from weaver! Still in the wrapping!
SOLD
Odds and Ends
-I have Crower rods for a GSR
-Looking for 300
-Im sure I will think of more later.
In the Near Future
-Stock GSR Block. I made 364whp on this block. Did compression test before the tune, 210psi accross the board. 113000 Miles on the block, 5000 Miles since its been turboed.
- Looking for $350
- And there will probably be more!!
If interested in anything please text 6082357201. Pick Up only.
Text for PICS!
Last edited by shawty22; Nov 12, 2011 at 02:11 PM.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Apr 2010
Posts: 685
Likes: 1
From: Wisconsin
Re: FS- B-Series DOC Topmount/Turbo Kit. GSR Head. Built Block & More!!!
Cameron dont be gay...way to copy me kinda. Haha if no one buys it ill just keep it and make more power than you. 
Thread Starter
Honda-Tech Member
Joined: Apr 2010
Posts: 685
Likes: 1
From: Wisconsin
Re: FS- B-Series DOC Topmount/Turbo Kit. GSR Head. Built Block & More!!!
Willing to sell Manifold, downpipe, and dumptube as a set. Offers are also being excepted, no lowballers please.
Thread
Thread Starter
Forum
Replies
Last Post
CHEETAH
Classifieds: Forced Induction
15
Oct 22, 2014 05:41 AM
