I don'T want to use any stock camshaft turbo set looking for opinions

 

Good thread

 

I figured the skunk stg 2 cams were being used by a lot. But many people use the CTR or even GSR stockers. I'm in for input on this as well!

 

I was being sarcastic . Could be talking about an LS or a D series lol

 

he said camshaft, duh... obviously its got to be a d series, i mean who the hell builds f series on h-t... lol... this is a much needed thread because there are no camshaft threads on here at all... maybe this could be a sticky... smh...

 

Ya I guess I shouldn't assume that the engine is a B series. oooppss

 

Stock are good for any power levels the OP will see or use... or some ideas are Delta cams regrinds

 

Ma bad I was is rush wen I posted its a fully build ls vtec stock sleves made 375 15psi gsr cams but vtec not satisfied want something that hit harder

 

An english lesson might hit harder than your vtec.

 

What turbocharger are you currently using? (please don't say just "T3/T4", that's not enough.)

Also, not to sound like a nagging nelly, but please use some punctuation. Its a bit difficult to understand what you're needs are. If you can type or text, you can use a comma or period. We'd appreciate it... truly.

 

do you have your current dyno chart? what intake manifold do you have?

 

No dyno chart. Garret 57.skunk2 manifold.gsr cams.b16 head with crower valvetrain

 

I recommend Skunk2 Tuner 1 camshafts. I also recommend proper punctuation or else you will get little to no help on this site. Just my .02

 

I think you need to dyno the car first and see what you get. It does no good to get any aftermarket camshaft if you're only using the turbocharger at very low pressure at like say 7-12 or 15psi or so. Once you get some pressure in, THEN a camshaft may be needed. But honestly, see what you get first, and if a camshaft in your case is even necessary

 

get some blox b's. you will notice the increase in top end.

 

itr cams ftw!

 

OP does not want STOCK cams. Blox B's if you want to keep it plain and simple

 

You don't have much room to grow with that turbo. Why not upgrade to a bigger turbo instead of different cams?

 

Because he wants to have name brand everything.