92-95 Civic MB fiberglass complete front end
Thread Starter
Honda-Tech Member
Joined: Jan 2008
Posts: 63
Likes: 0
From: Apple Valley, Ca, USA
92-95 Civic MB fiberglass complete front end
92-95 Civic MB fiberglass complete front end with brackets and mounts. They dont make these anymore. Cost me $1300 new. The front end has the headlights cut out. It doesnt need but could use one $2 zeus fitting, one of them broke off but the other 3 hold fine and I drive it on the street for years like that. The front end is primered grey and in great shape. $350 firm
Instead of making a new thread, I still have it for sale. These parts are sitting in my garage. STILL FOR SALE! A VERY RARE PART! HARD TO FIND!
Willing to sell the whole car.
Spec's 1550lbs without driver! Weighed at scales. Ran low 13's with only intake and exhaust on the stock motor at LACR. It's so light, it's illegal and I had to hide weights under the seat for inspection.
JDM gutted doors!
MB fiberglass front end!
MB fiber glass hatch!
Brand new KYB GR2's installed on the rear and the front, still brand new in the box.
90 Integra disk brakes in the rear with proportioning valve.
Camber kit in the front and rear!
Full Energy Suspension kit! Cost me $500. The master kit is not a full kit! I had to buy 2 more kits. One prothane kit. Every bushing has been replaced with ES or Prothane. It was a serious amount of labor!
3 gallon fuel cell from Jegs.
No motor or trans or Tach. It has the wiring harness but my dogs chewed up the clips in the engine bay and it will need replaced or repaired. The rest of the harness is in great shape, it's just the engine harness. The harness used was from an 87 Integra and are easy to find!
Comes with the wheels and rims as seen in the pic.
Aluminum racing seat with harness.
Light weight steering wheel.
Make me an offer! Or I wil just part it out! 760 605-0216 Reno
Instead of making a new thread, I still have it for sale. These parts are sitting in my garage. STILL FOR SALE! A VERY RARE PART! HARD TO FIND!
Willing to sell the whole car.
Spec's 1550lbs without driver! Weighed at scales. Ran low 13's with only intake and exhaust on the stock motor at LACR. It's so light, it's illegal and I had to hide weights under the seat for inspection.
JDM gutted doors!
MB fiberglass front end!
MB fiber glass hatch!
Brand new KYB GR2's installed on the rear and the front, still brand new in the box.
90 Integra disk brakes in the rear with proportioning valve.
Camber kit in the front and rear!
Full Energy Suspension kit! Cost me $500. The master kit is not a full kit! I had to buy 2 more kits. One prothane kit. Every bushing has been replaced with ES or Prothane. It was a serious amount of labor!
3 gallon fuel cell from Jegs.
No motor or trans or Tach. It has the wiring harness but my dogs chewed up the clips in the engine bay and it will need replaced or repaired. The rest of the harness is in great shape, it's just the engine harness. The harness used was from an 87 Integra and are easy to find!
Comes with the wheels and rims as seen in the pic.
Aluminum racing seat with harness.
Light weight steering wheel.
Make me an offer! Or I wil just part it out! 760 605-0216 Reno
Last edited by Cloneufc; Jun 2, 2013 at 09:42 PM.
Honda-Tech Member
Joined: Apr 2002
Posts: 657
Likes: 0
From: va, USA
Re: 92-95 Civic MB fiberglass complete front end
How much shipped to VA area code 703?
or if you can email me at LivinDreamsDC2@hotmail.com
or if you can email me at LivinDreamsDC2@hotmail.com
Last edited by LD_EGSICK; Oct 11, 2011 at 05:24 PM. Reason: email addy
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jan 2008
Posts: 63
Likes: 0
From: Apple Valley, Ca, USA
Re: 92-95 Civic MB fiberglass complete front end
Sorry I wont ship this thing. It is HUGE! It would probably cost more to ship than its worth.
For pickup only!
I have gotten a lot of offers to pick it up but everyone has flaked. I have gotten more offers to ship it, but I will NOT ship! You can pick it up as far as youre willing to drive.
For pickup only!
I have gotten a lot of offers to pick it up but everyone has flaked. I have gotten more offers to ship it, but I will NOT ship! You can pick it up as far as youre willing to drive.
Thread Starter
Honda-Tech Member
Joined: Jan 2008
Posts: 63
Likes: 0
From: Apple Valley, Ca, USA
Re: 92-95 Civic MB fiberglass complete front end
Instead of making a new thread, I still have it for sale. These parts are sitting in my garage. STILL FOR SALE! A VERY RARE PART! HARD TO FIND!
Willing to sell the whole car.
Spec's 1550lbs without driver! Weighed at scales. Ran low 13's with only intake and exhaust on the stock motor at LACR. It's so light, it's illegal and I had to hide weights under the seat for inspection.
JDM gutted doors!
MB fiberglass front end!
MB fiber glass hatch!
Brand new KYB GR2's installed on the rear and the front, still brand new in the box.
90 Integra disk brakes in the rear with proportioning valve.
Camber kit in the front and rear!
Full Energy Suspension kit! Cost me $500. The master kit is not a full kit! I had to buy 2 more kits. One prothane kit. Every bushing has been replaced with ES or Prothane. It was a serious amount of labor!
3 gallon fuel cell from Jegs.
No motor or trans. It has the wiring harness but my dogs chewed up the clips in the engine bay and it will need replaced or repaired. The rest of the harness is in great shape, it's just the engine harness. The harness used was from an 87 Integra and are easy to find!
Comes with the wheels and rims as seen in the pic.
Make me an offer! Or I wil just part it out! 760-605-0216 Reno
Need cash for my Turbo RSX build!
Willing to sell the whole car.
Spec's 1550lbs without driver! Weighed at scales. Ran low 13's with only intake and exhaust on the stock motor at LACR. It's so light, it's illegal and I had to hide weights under the seat for inspection.
JDM gutted doors!
MB fiberglass front end!
MB fiber glass hatch!
Brand new KYB GR2's installed on the rear and the front, still brand new in the box.
90 Integra disk brakes in the rear with proportioning valve.
Camber kit in the front and rear!
Full Energy Suspension kit! Cost me $500. The master kit is not a full kit! I had to buy 2 more kits. One prothane kit. Every bushing has been replaced with ES or Prothane. It was a serious amount of labor!
3 gallon fuel cell from Jegs.
No motor or trans. It has the wiring harness but my dogs chewed up the clips in the engine bay and it will need replaced or repaired. The rest of the harness is in great shape, it's just the engine harness. The harness used was from an 87 Integra and are easy to find!
Comes with the wheels and rims as seen in the pic.
Make me an offer! Or I wil just part it out! 760-605-0216 Reno
Need cash for my Turbo RSX build!
Last edited by Cloneufc; Jun 2, 2013 at 09:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
92hondaswap
Honda Civic / Del Sol (1992 - 2000)
27
May 19, 2008 11:16 AM
