dc shell k ready most swap parts already
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jan 2008
Posts: 1,311
Likes: 0
From: laporte, IN, laporte
car is getting parted out let me know what you want!!!!
!!!!!IF YOU DONT BUMP I WILL NOT REPLY!!!!
If you dont like my prices or have any negative comment -take you hand reach into your pocket move the lint and take out an quarter and call somebody how cares :>
Car is located in IN 46350
Willing to.trade for.an
.built.K24
REALLY nice rims. 5thug only
Nice seats
nice daily have cash to put on top
O ya and cash!!
I have owned the car for the last 5 yrs and has been daily driven all 5 yrs, so the body has some blemishes.Everything in the car works from the power lock, windows, mirrors,sunroof and powers antenna. First off i will let you know all the cons of the car before i tell you the pros. asking 3k obo for everything
cons:
small crack in front windsheild
minor dings/scratches
has 13in steeles (since there are 13in wheels i can not fit the calipers)
front passengar strut is broken
will also need a front passengar fork
will need alignment
only 2 lug nuts on each rim
back on 4 lug
hood is black
engine bay needs to be finshed (painted)
no radio
pros:
k-ready shell $1500
griffin full size radiator $400
oem swap haveshafts $100
hasport mounts $275
hybrid racing conversion harness already wired in
chasebay mil spec harness $850
chasebay clutch line $75
gsr throttle cable$25
bnib chasebay brake line tuck $280
yellow top battery
98+ rear tail lights
brand new low beam and high beam headlights
optional side skirts ( unknown brand-but look good!)
full 3in thermol exhaust (no cat) $275
hybrid racing nickel plated fittings fuel lines (trucked no regulator) $300
custom cold air intake (just like k-tuned) has k&n filter works good and has heat wrap
suspension:
omin full sleeve coilovers $300
blox front camber kit adj $75
blox rear camber kit adj $75
earls stainless steele brake lines $85
brand new oem front wheel bearings
asr rear brace (crhome) $200
99 si rear say bar with end links ( dont know if it will work-came ff new car) $75
drilled and slotted front rotors
hawk pads
k sport lca $75
front strut tower bar (knock off mugen)
interior:
nrg hub
clean *** all black interior -you can eat off of it when its dirty!
this was the car about 5days ago before i took my swap out








this is how the car looks now

k sport lca a lil i will clean these up before i ship them!!!

here is the thermal exhuast its the only pic at this time

99 si rear swaybar

mounts

custom intake (knock off k-tuned pulled an 244 with this)

nrg hub dc/eg

asr rear brace there are a couple nicks but nothing big

chasebay clutch cable

hybrid racing fuel lines nickel plated!!! with fuel filter luv these

griffin its is a nice piece with the og box in the background i have one slim fan and an lower hybrid racing hose

this is a inake that i just got back from the welder the other day had a small hair line crack that i noticed on the runner its fixed now it is also tapped for direct port 3 of the 4 are sealed with what appears to be somekind of gasket sealer easy fix if not running nos it was p&p from hytech also has an tb adapter welded on too on to the pic asking 400obo






thanks for your time
marc k
!!!!!IF YOU DONT BUMP I WILL NOT REPLY!!!!
If you dont like my prices or have any negative comment -take you hand reach into your pocket move the lint and take out an quarter and call somebody how cares :>
Car is located in IN 46350
Willing to.trade for.an
.built.K24
REALLY nice rims. 5thug only
Nice seats
nice daily have cash to put on top
O ya and cash!!
I have owned the car for the last 5 yrs and has been daily driven all 5 yrs, so the body has some blemishes.Everything in the car works from the power lock, windows, mirrors,sunroof and powers antenna. First off i will let you know all the cons of the car before i tell you the pros. asking 3k obo for everything
cons:
small crack in front windsheild
minor dings/scratches
has 13in steeles (since there are 13in wheels i can not fit the calipers)
front passengar strut is broken
will also need a front passengar fork
will need alignment
only 2 lug nuts on each rim
back on 4 lug
hood is black
engine bay needs to be finshed (painted)
no radio
pros:
k-ready shell $1500
griffin full size radiator $400
oem swap haveshafts $100
hasport mounts $275
hybrid racing conversion harness already wired in
chasebay mil spec harness $850
chasebay clutch line $75
gsr throttle cable$25
bnib chasebay brake line tuck $280
yellow top battery
98+ rear tail lights
brand new low beam and high beam headlights
optional side skirts ( unknown brand-but look good!)
full 3in thermol exhaust (no cat) $275
hybrid racing nickel plated fittings fuel lines (trucked no regulator) $300
custom cold air intake (just like k-tuned) has k&n filter works good and has heat wrap
suspension:
omin full sleeve coilovers $300
blox front camber kit adj $75
blox rear camber kit adj $75
earls stainless steele brake lines $85
brand new oem front wheel bearings
asr rear brace (crhome) $200
99 si rear say bar with end links ( dont know if it will work-came ff new car) $75
drilled and slotted front rotors
hawk pads
k sport lca $75
front strut tower bar (knock off mugen)
interior:
nrg hub
clean *** all black interior -you can eat off of it when its dirty!
this was the car about 5days ago before i took my swap out








this is how the car looks now

k sport lca a lil i will clean these up before i ship them!!!

here is the thermal exhuast its the only pic at this time

99 si rear swaybar

mounts

custom intake (knock off k-tuned pulled an 244 with this)

nrg hub dc/eg

asr rear brace there are a couple nicks but nothing big

chasebay clutch cable

hybrid racing fuel lines nickel plated!!! with fuel filter luv these

griffin its is a nice piece with the og box in the background i have one slim fan and an lower hybrid racing hose

this is a inake that i just got back from the welder the other day had a small hair line crack that i noticed on the runner its fixed now it is also tapped for direct port 3 of the 4 are sealed with what appears to be somekind of gasket sealer easy fix if not running nos it was p&p from hytech also has an tb adapter welded on too on to the pic asking 400obo






thanks for your time
marc k
Last edited by kings**t; Sep 29, 2011 at 04:56 AM.


