Most stuff is negotiable, but no trades please.

Call/text for immediate response: 626.271.4164

Located in SoCal - City of Industry area.

K, here we go....


Brand new BYS DC2 front bumper. Drilled for ARC Magic winglets (not included). Unpainted and never used (i.e. no scrapes/cracks/anything). The bottom has holes from the ARC canards. Asking $900 firm.












98' spec Spoon Assembled Integra Type R Transmission with ATS 4.9 FD and a Kaaz 1.5 way clutch type LSD. 2500 miles, it is pretty much new. Asking $2,000.










Recaro SRD's with rails. 9/10 condition. $1,100














JDM power folding mirrors. These have a yellow anti-glare lens on them, I've never seen another pair like these. I also performed the USDM base swap, which means that the mirror angle is correct for LHD. Set includes: JDM power folding mirrors, relay, door switch, pigtail harnesses, inside mirror caps, a set of donor USDM mirrors that I used for the base swap and the original JDM bases. Asking $400












Mugen FG360 with DC2 hub. Horn buttons are perfect. Some wear on top of wheel. $800


















Koyo polished aluminum radiator. New and never used, but has some wear from storage. Asking $300






98' spec Integra all red tail lights. Clean, no cracks. Some light scratches from storage but it should buff right out. asking $150





Carbon fiber rear diffuser. Universal but I cut it to fit the DC2 rear tow hook. Clear coat cracking as shown in last pic $700


Cusco Safety 21 6 point roll cage. DC2 fitment (no sunroof). Uncoated steel (I was going to get it chrome plated). $800












JDM Personal Box. No Smoking!! The inner felt is CLEAN. $150





Carbon fiber eyelids. Some minor scratching, it could be polished out. Asking SOLD to subliminalitr

DC2 Miracle Cross bar, practically brand new. SOLD

Rare DC2 Shift Sport fenders. These have been drilled and mounted to ensure fitment, but they are unpainted. I can personally say that if you know how to align your hood/bumper/fenders - you can get a very nice fitment with these. Not as good as stock, but very good for aftermarket. These have stress cracks from storage - a body shop will need to prep these for paint. Asking SOLD

DC2 Endless 4 piston brake calipers. These are the earlier model. Serial Number 401–025 and verified authentic by Ganesh Krishnan of Endless USA. Comes with homemade adapter kit, brand new Endless pads, and stainless steel brake lines. SOLD

Carbing three point strut brace. DC2 / EG fitment. Asking SOLD to DBiNfEcTeD* on HT.

Beatrush cooling plate. DC2 fitment SOLD to Certified Honda

Mugen Version 1 spoiler WITH BRAND NEW AUTHENTIC MUGEN EMBLEMS. The emblems are hard to get unto itself. SOLD to OG

4x114 15mm wheel spacers. I have 2 pairs. You'll need extended wheel lugs to use these. SOLD to phunhaus on HT.

GSR head. port and polished, 3 angle valve job, Supertech valves / springs/ retainers. Never installed and never started. SOLD

Innovative billet motor mounts for B series into DC/EG chassis. Includes 3 pieces (left tranny mount, rear motor mount, and right motor mount). Rubber bushings need to be replaced, Innovative offers that service. Asking SOLD

Toda Flywheel and pressure plate for B series. Weighs alittle over 8lbs. SOLD

Carbon fiber eyelids. Some minor scratching, it could be polished out. Asking SOLD

 

Endless Caliper Set 4x100 w/ the Custom brackets? Also is the Wheel Size limit still 16"+? No 15" Clearance?

 

Endless Caliper needs 11" rotors - same size at stock ITR's. If you have 4x100, you can order the rotors from Fast Brakes (http://www.fastbrakes.com/product_p/...h%20rotors.htm). The custom brackets will work on non-ITR knuckles, I test mounted them on my Integra LS and they mount perfectly.

They will clear some 15" wheels, but it really depends on the spoke pattern and offset. For example, they will clear Regamaster 15" wheels. The calipers are the same size as the Spoon caliper - and there's alot of info on what clears those calipers.

 

up!

 

up!

 

ttt texted!!

 

Up!

 

 

up!

 

bump

 

Nice parts baller prices!!

 

up!

I just realized that if I can sell just 4 of my parts - I'll have enough to pay off my car.

Cmon everybody, let's pay off my car lol!

 

up!

 

bump

 

 

Bump for you and my old cage.....btw are you selling those winglets?

 

lol, yup it's your old cage. Yeah the winglets are sold already.

 

up

 

bump for nice parts

 

 

up!

 

That head is so tempting!

 

That's what she said.

 

Up!

 

up!