M22XX Cams
Honda-Tech Member
Joined: Aug 2009
Posts: 7,635
Likes: 3
From: Baton Rouge,Louisiana
B*a*n*n*e*d
Joined: Jun 2011
Posts: 337
Likes: 0
Re: M22XX Cams
Does this "All Motor" tool even know anything (name is almost weak and generic as RedSIHatch or IntegraTypeR)? His signature smacks of Ron-Popil-Like gimicketry.
Been reading his posts and he don't know **** 'bout cams. Why he keep on posting non-useful advertised cam numbers.
If you are going to post cam numbers please post the 0.050" or 1mm numbers. Most anything else is a disservice.
Do the world a favor and kick yo'self in the nuts before you post lame-*** **** like this again.
Been reading his posts and he don't know **** 'bout cams. Why he keep on posting non-useful advertised cam numbers.
If you are going to post cam numbers please post the 0.050" or 1mm numbers. Most anything else is a disservice.
Do the world a favor and kick yo'self in the nuts before you post lame-*** **** like this again.
Honda-Tech Member
Joined: Jan 2007
Posts: 949
Likes: 0
From: NWCCT
Re: M22XX Cams
Does this "All Motor" tool even know anything (name is almost weak and generic as RedSIHatch or IntegraTypeR)? His signature smacks of Ron-Popil-Like gimicketry.
Been reading his posts and he don't know **** 'bout cams. Why he keep on posting non-useful advertised cam numbers.
If you are going to post cam numbers please post the 0.050" or 1mm numbers. Most anything else is a disservice.
Do the world a favor and kick yo'self in the nuts before you post lame-*** **** like this again.
Been reading his posts and he don't know **** 'bout cams. Why he keep on posting non-useful advertised cam numbers.
If you are going to post cam numbers please post the 0.050" or 1mm numbers. Most anything else is a disservice.
Do the world a favor and kick yo'self in the nuts before you post lame-*** **** like this again.
Honda-Tech Member
Joined: Aug 2009
Posts: 7,635
Likes: 3
From: Baton Rouge,Louisiana
Re: M22XX Cams
Does this "All Motor" tool even know anything (name is almost weak and generic as RedSIHatch or IntegraTypeR)? His signature smacks of Ron-Popil-Like gimicketry.
Been reading his posts and he don't know **** 'bout cams. Why he keep on posting non-useful advertised cam numbers.
If you are going to post cam numbers please post the 0.050" or 1mm numbers. Most anything else is a disservice.
Do the world a favor and kick yo'self in the nuts before you post lame-*** **** like this again.
Been reading his posts and he don't know **** 'bout cams. Why he keep on posting non-useful advertised cam numbers.
If you are going to post cam numbers please post the 0.050" or 1mm numbers. Most anything else is a disservice.
Do the world a favor and kick yo'self in the nuts before you post lame-*** **** like this again.
M22
Intake cam -
283 @ .020
267 @ .040
260 @ .050
235 @ .100
194 @ .200
151 @ .300
95 @ .400
464 @ Max lift
Exhaust cam-
280 @ .020
265 @ .040
259 @ .050
236 @ .100
194 @ .200
150 @ .300
91 @ .400
457 @ Max lift
These are real world numbers, not advertised numbers like i just gave.
Oh and just so we're clear.. here's the information before you ask another stupid question like where are the centerlines.
INTAKE EVENTS AT 0.050:
102 LC
OPEN 28 BTDC; CLOSE 52 ABDC
EXHAUST EVENTS AT 0.050:
110 LC
OPEN 60 BBDC; CLOSE 20 ATDC
LIFT AT TDC METHOD, lock vtec.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jun 2002
Posts: 1,217
Likes: 1
From: Berrien Springs MI
Re: M22XX Cams
thanks for the info
i am putting together another motor and need the data for degreeing the cams.
these cams are great in my current motor but i am thinking that i might go with the m24xx if i end up getting a 84mm block.
i am putting together another motor and need the data for degreeing the cams.
these cams are great in my current motor but i am thinking that i might go with the m24xx if i end up getting a 84mm block.
Honda-Tech Member
Joined: Aug 2009
Posts: 7,635
Likes: 3
From: Baton Rouge,Louisiana
Thread
Thread Starter
Forum
Replies
Last Post
