FREE STUFF - Y8 Head, Cometic gasket(new) Fender bolts!!!
Trial User
Joined: Aug 2011
Posts: 0
Likes: 0
Re: FREE STUFF - Y8 Head, Cometic gasket(new) Fender bolts!!!
Im rebuilding a d16y8. have a few questions...
when i resleeve then engine.... are they press fit or like a few diesels... o-rings on them to "seal" them
I plan on running 18psi of boost on 8.5to1 compression... where can i go to get my ecu "tuned" or is there a complete setup with that i can purchase... "that much boost"
and the last thing is, i have a 94 del sol with a d15 in it... putting the d16 in it... for wiring... do all i have to do is run them to "activate" the vtec on d16
when i resleeve then engine.... are they press fit or like a few diesels... o-rings on them to "seal" them
I plan on running 18psi of boost on 8.5to1 compression... where can i go to get my ecu "tuned" or is there a complete setup with that i can purchase... "that much boost"
and the last thing is, i have a 94 del sol with a d15 in it... putting the d16 in it... for wiring... do all i have to do is run them to "activate" the vtec on d16
Thread Starter
Honda-Tech Member
Joined: Nov 2009
Posts: 38
Likes: 0
From: Ohio
Re: FREE STUFF - Y8 Head, Cometic gasket(new) Fender bolts!!!
As for technical support I would say best asked in a tech forum but I know with the right tune a SOHC can support 300-350 HP on stock sleeves if built right and TUNED
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Nov 2009
Posts: 38
Likes: 0
From: Ohio
Thread
Thread Starter
Forum
Replies
Last Post
98ek9noboost
Honda Civic / Del Sol (1992 - 2000)
2
Jun 8, 2008 09:04 AM
90 Si Hatch
Honda CRX / EF Civic (1988 - 1991)
5
Feb 16, 2005 10:19 AM
