1997 Civic Hatch with built LS/VTEC
Thread Starter
Honda-Tech Member
Joined: Dec 2007
Posts: 590
Likes: 0
From: elk grove village, U.S.A
1997 Civic Hatch with built LS/VTEC
1997
Honda
Civic Dx
This has been a 4 year project for me and I have invested a stupid amount of work and money into this thing. Unfortunately I have lost interest and motivation with the project and am just hoping to get some of my investment back to help pay off my debts. The car is almost 100% ready to go, all that needs to be done is a tune. All the machine work was done by a reputable shop and I'm sure I can find the receipt and spec sheet for the work if someone asks. I'm already taking a big hit on this thing so I'm pretty firm on the price. I will sell the motor separately from the shell but will not sell the shell unless the motor sells first. If anything I will keep the shell until I can afford another build. Car has no rust at all and has a clean WI title. Engine details will only be given to truly interested individuals. I recommend the vehicle be towed home considering it only has a Phereable.net base map but will also be sold with Hondata S300. Please pm me with any questions or concerns you may have. Thanks.
NEW PRICE $7000 obo
ENGINE
SPECIFICS WILL BE GIVEN TO TRULY INTERESTED INDIVIDUALS
The engine only has about 20-30 mileson the build, only time it was ran or driven was to check for leaks or problems and if anything was found it was repaired a.s.a.p.
SHELL
SUSPENSION
-Function and Form type 2 coilovers
-Buddy Club front and rear camber kits
-Brand new lower ball joints
-Brand new outer tie rod ends
-Brand new front wheel bearings
-Freshly polished GSR blades with Falken Azenis w/ under 5,000 miles on them
BRAKES
-Rear disk conversion off 00' Civic Si
-Brand new Duralast Gold rotors and brake pads all around
EXTERIOR
-Carbon fiber Spoon replica duckbill
-Carbon fiber hatch w/FAL window
INTERIOR
-NRG hub/quick release/ and steering wheel
-00' Civic Si front seats
-Autometer electric oil pressure gauge
-AEM UEGO wideband
-Sparco harness
Climate control has all been removed and I don't have any of it left unfortunately. I do have the rear seats and seat belts but they are not installed
Considering today's weather I was unable to take quality pictures, these are all I have at the time. I hope to post better pictures tomorrow
Honda
Civic Dx
This has been a 4 year project for me and I have invested a stupid amount of work and money into this thing. Unfortunately I have lost interest and motivation with the project and am just hoping to get some of my investment back to help pay off my debts. The car is almost 100% ready to go, all that needs to be done is a tune. All the machine work was done by a reputable shop and I'm sure I can find the receipt and spec sheet for the work if someone asks. I'm already taking a big hit on this thing so I'm pretty firm on the price. I will sell the motor separately from the shell but will not sell the shell unless the motor sells first. If anything I will keep the shell until I can afford another build. Car has no rust at all and has a clean WI title. Engine details will only be given to truly interested individuals. I recommend the vehicle be towed home considering it only has a Phereable.net base map but will also be sold with Hondata S300. Please pm me with any questions or concerns you may have. Thanks.
NEW PRICE $7000 obo
ENGINE
SPECIFICS WILL BE GIVEN TO TRULY INTERESTED INDIVIDUALS
The engine only has about 20-30 mileson the build, only time it was ran or driven was to check for leaks or problems and if anything was found it was repaired a.s.a.p.
SHELL
SUSPENSION
-Function and Form type 2 coilovers
-Buddy Club front and rear camber kits
-Brand new lower ball joints
-Brand new outer tie rod ends
-Brand new front wheel bearings
-Freshly polished GSR blades with Falken Azenis w/ under 5,000 miles on them
BRAKES
-Rear disk conversion off 00' Civic Si
-Brand new Duralast Gold rotors and brake pads all around
EXTERIOR
-Carbon fiber Spoon replica duckbill
-Carbon fiber hatch w/FAL window
INTERIOR
-NRG hub/quick release/ and steering wheel
-00' Civic Si front seats
-Autometer electric oil pressure gauge
-AEM UEGO wideband
-Sparco harness
Climate control has all been removed and I don't have any of it left unfortunately. I do have the rear seats and seat belts but they are not installed
Considering today's weather I was unable to take quality pictures, these are all I have at the time. I hope to post better pictures tomorrow
Last edited by igotvtec16; Aug 12, 2011 at 02:23 PM.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Dec 2007
Posts: 590
Likes: 0
From: elk grove village, U.S.A
Re: 1997 Civic Hatch with built LS/VTEC
Everything is still for sale. Willing to negotiate on the price, getting rid of this would really help pay off school loans so dont hesitate to throw me an offer
Thread Starter
Honda-Tech Member
Joined: Dec 2007
Posts: 590
Likes: 0
From: elk grove village, U.S.A
Re: 1997 Civic Hatch with built LS/VTEC
Sorry guys really not interested in any trades, I need the money to pay off debts. Hoping to sell everything together or the shell and swap seperate but not looking to part out as of now. Thanks for the interest.
Thread
Thread Starter
Forum
Replies
Last Post
laughinxxx
Vehicles for sale
10
Mar 11, 2005 05:27 PM