Looking to start an ls vtec build for my sol to boost. I am in need of an ls block which it can be bare with sensors. I'd like a crank if possible do not need rods or pistons. Must be in good shape no cylinder wall damage or egg shaped cylinders. Stock bore also.

Also looking for a b16 vtec head prefer with rail and regulator. Don't need injectors manifold or throttle body. Must be in good shape and complete. Adjustable cam gears is a plus but not needed.

If you have a full ls vtec motor with forged rods and pistons I may look into that as well just let me know what you have.

 

i got a fully build gsr head that was on my sfwd car so its build for boost pm if u interested

 

i have a feshly honed and micropolished b18c1 block if interested ready for whatevers

 

How much you wanting and where you located.

 

I have 2 different BARE LS blocks... Stock bore, but will need to be bored over due to surface rust on the cylinder walls. I also have 2 LS cranks that need to be welded/reground on 1 rod journal each(spun bearing).

PM if interested.

 

got Ls block and crank make offer

 

Not wanting to bore the motor, and not wanting to have to do work to crank sorry.

PMs sent

 

I have a stock b16 head, it is comlpete, and all original. Pm if you are interested.

 

Check out my engine

http://philadelphia.craigslist.org/pts/2422852109.html

 

i have built b16 head skunk 2 everything port polish...i also have a ls everything still in it...pm me if ur interested

 

I have a freshly honed 81mm LS block perfect condition, no scratched cylinder walls.. I live in So Cal LMK if you're local $50 picked up, shipping is extra of course..