Turbo/ CRX/ B16 Partout!!
Thread Starter
Honda-Tech Member
Joined: Jan 2008
Posts: 805
Likes: 0
From: Springfield, Missouri
Turbo/ CRX/ B16 Partout!!
My goals and asperations have changed so alas, i'm taking a small hit and giving you guys some breaks on very quality and high end parts. Heres a link so I don't get slammed for double posting. I'm located in Springfield, MO.
http://www.hondamarketplace.com/show...1#post45528516
http://www.hondamarketplace.com/show...1#post45528516
Thread Starter
Honda-Tech Member
Joined: Jan 2008
Posts: 805
Likes: 0
From: Springfield, Missouri
Re: Turbo/ CRX/ B16 Partout!!
Heres the list;
B-16 Golden Eagle sleeved, ERL 5 point main girdle with ALL machine work completed. Block has been O-ringed and bored to 84MM. Block has never been assembled or used. Also have roll of copper for Orings. Also have receipt of all machine work performed in conjuction with the girdle. $1800
Now offering a discount for the whole forged shortblock as an assembly!!!.......Wisecos, Eagle rods AND crank, and the block all for $2800 SHIPPED!!!!!!
1988 CRX Si (with title)$SOLDcar has entire ES bushings installed, including trailing arm bushings (every bushing on the car/ suspension has been replaced) Front end has new OEM wheel bearings installed/ new MOOG tie rods on both sides/ New MOOG ball joints installed/ Eibach Ground control coilovers, Custom built and designed front traction bar. New OEM brake drums and drum hardware kit. New OEM rear compensator arms and rear Upper arms. All suspension arms have been sanded down and painted with flat black suspension paint. Shell will not come with the wheels shown. Either bring your own set or i'll pick up a very cheap set of steelies for you to roll it on and off the trailer with. Interior is mostly complete minus trunk covers/ carpet and seats. Has a good condition MOMO steering wheel. Aside from that....what ya see is what ya get. Also, this is a rust free rear fenders NOT one that has been cheaply putty'd. I understand this seems high for a "shell" but this suspension is completely redone with quality parts. and comes with plenty of high grade and quality extras. Throw your setup in this shell and it is drag race ready.
Mugen MR-5 14" wheels, has tires but would not recommend keeping them for long. These wheels are MINT and have not been altered or reworked/ painted $SOLD
Edelbrock Victor X intake mani BNIB $275pn# 4764
SuperTech B series 1mm oversized, nitrile coated dished valves BNIB $210pn# HIVN-1001 and HEVN-1001/2D
SuperTech B series dual springs and titanium retainers BNIB SOLD pn# SUP SPRK-H100DR
SuperTech B series Bronze valve guides BNIB $60 pn#SUP GDE-HB55-I
B16 head (currently stripped prepped for machine work can reassemble if wished) $SOLD
B16 dizzy(OBD0) and 9.3mm plug wires $60
Bare B16 block, still in good condition with pistons and rods $150
B16 factory crank good condition (stored vertically) $100
Eagle 4340 forged crank BNIB (1500hp) $450 pn#1630311772
B series Wiseco Pistons 84mm BNIB $415 pn#K649M84
B16 Eagle connecting rods BNIB $250 pn#CRS5290H3D
WW urethane front bumper (not immitation) never mounted $SOLD
Borg Warner S360 .91AR divided T4 housing, never used. Has slight surface rust on exhaust housing from sitting. Can clean up with a wire wheel quickly if you wish (500-800hp) SOLD pn# 15 177272
Omni 68mm Throttle body BNIB SOLD pn# TB-68
B16 factory intake mani with fuel rail and injectors $SOLD
CRX true RS*R axle back exhaust great condition $SOLD
Hasport B-series mounts (cable tranny) SOLD
Hasport B-series shift linkage SOLD
Y1 cable tranny with LSD, comes with new OEM mounting bolts $750obo
Skunk 2 cam gears $150
Moroso B-series oil pan SOLD
B16 water pump BNIB $40
B16 bottom end gasket kit BNIB$50
B16 head gasket set BNIB SOLD
SuperTech valve seals, intake and exhaust BNIB $10 pn# VS-H5.5E/I
All prices DO NOT INLUDE SHIPPING OR PAYPAL FEES if thats how you choose to pay. However I will not "overcharge" for shipping you will get legitimate estimates and charges for the shipping. Any questions on any of the items please just send me a text 417-536-7153. I work alot so please give me some time to return them. Thanks guys.
P.S.- I custom made a manifold for this turbo. It is my first piece ever so it's not astheticly appealing as ones that cost $1k+ but it is solid and well built in my opinion. I would honestly prefer not to sell it just to keep it for myself as my first fabricated component. However is someone truley wants to buy it I will sell it for $500. It is a B-series flange setup for a T-4 divided housing turbo flange. It is mocked up for 2 turbosmart 38mm wastegates. The top clearance of the manifold will be VERY close to a hood on a CRX. I have not had a hood mounted to check but I can tell you it would be very close and a chance it would need slight modification to the hood reinforcement.
B-16 Golden Eagle sleeved, ERL 5 point main girdle with ALL machine work completed. Block has been O-ringed and bored to 84MM. Block has never been assembled or used. Also have roll of copper for Orings. Also have receipt of all machine work performed in conjuction with the girdle. $1800
Now offering a discount for the whole forged shortblock as an assembly!!!.......Wisecos, Eagle rods AND crank, and the block all for $2800 SHIPPED!!!!!!
1988 CRX Si (with title)$SOLDcar has entire ES bushings installed, including trailing arm bushings (every bushing on the car/ suspension has been replaced) Front end has new OEM wheel bearings installed/ new MOOG tie rods on both sides/ New MOOG ball joints installed/ Eibach Ground control coilovers, Custom built and designed front traction bar. New OEM brake drums and drum hardware kit. New OEM rear compensator arms and rear Upper arms. All suspension arms have been sanded down and painted with flat black suspension paint. Shell will not come with the wheels shown. Either bring your own set or i'll pick up a very cheap set of steelies for you to roll it on and off the trailer with. Interior is mostly complete minus trunk covers/ carpet and seats. Has a good condition MOMO steering wheel. Aside from that....what ya see is what ya get. Also, this is a rust free rear fenders NOT one that has been cheaply putty'd. I understand this seems high for a "shell" but this suspension is completely redone with quality parts. and comes with plenty of high grade and quality extras. Throw your setup in this shell and it is drag race ready.
Mugen MR-5 14" wheels, has tires but would not recommend keeping them for long. These wheels are MINT and have not been altered or reworked/ painted $SOLD
Edelbrock Victor X intake mani BNIB $275pn# 4764
SuperTech B series 1mm oversized, nitrile coated dished valves BNIB $210pn# HIVN-1001 and HEVN-1001/2D
SuperTech B series dual springs and titanium retainers BNIB SOLD pn# SUP SPRK-H100DR
SuperTech B series Bronze valve guides BNIB $60 pn#SUP GDE-HB55-I
B16 head (currently stripped prepped for machine work can reassemble if wished) $SOLD
B16 dizzy(OBD0) and 9.3mm plug wires $60
Bare B16 block, still in good condition with pistons and rods $150
B16 factory crank good condition (stored vertically) $100
Eagle 4340 forged crank BNIB (1500hp) $450 pn#1630311772
B series Wiseco Pistons 84mm BNIB $415 pn#K649M84
B16 Eagle connecting rods BNIB $250 pn#CRS5290H3D
WW urethane front bumper (not immitation) never mounted $SOLD
Borg Warner S360 .91AR divided T4 housing, never used. Has slight surface rust on exhaust housing from sitting. Can clean up with a wire wheel quickly if you wish (500-800hp) SOLD pn# 15 177272
Omni 68mm Throttle body BNIB SOLD pn# TB-68
B16 factory intake mani with fuel rail and injectors $SOLD
CRX true RS*R axle back exhaust great condition $SOLD
Hasport B-series mounts (cable tranny) SOLD
Hasport B-series shift linkage SOLD
Y1 cable tranny with LSD, comes with new OEM mounting bolts $750obo
Skunk 2 cam gears $150
Moroso B-series oil pan SOLD
B16 water pump BNIB $40
B16 bottom end gasket kit BNIB$50
B16 head gasket set BNIB SOLD
SuperTech valve seals, intake and exhaust BNIB $10 pn# VS-H5.5E/I
All prices DO NOT INLUDE SHIPPING OR PAYPAL FEES if thats how you choose to pay. However I will not "overcharge" for shipping you will get legitimate estimates and charges for the shipping. Any questions on any of the items please just send me a text 417-536-7153. I work alot so please give me some time to return them. Thanks guys.
P.S.- I custom made a manifold for this turbo. It is my first piece ever so it's not astheticly appealing as ones that cost $1k+ but it is solid and well built in my opinion. I would honestly prefer not to sell it just to keep it for myself as my first fabricated component. However is someone truley wants to buy it I will sell it for $500. It is a B-series flange setup for a T-4 divided housing turbo flange. It is mocked up for 2 turbosmart 38mm wastegates. The top clearance of the manifold will be VERY close to a hood on a CRX. I have not had a hood mounted to check but I can tell you it would be very close and a chance it would need slight modification to the hood reinforcement.
Last edited by TJChad; Aug 6, 2011 at 07:06 AM.
