i bought a proform shift light. I also have the msd pro billet setup i wire it to the empty blue wire in the msd harness and nothing happened so im trying to figure out where to wire it too

 

I found this... Your Proform shift light will require an adapter PN 8920. This will install in between the tach output on the MSD, and the shift light.

http://www.msdignition.com/product.a...723&terms=8920 94

 

is there no other way to do this and the link you posted wont open

 

No there is not.

Link works for me.

Go to MSD... http://www.msdignition.com/default.aspx

Click on products... http://www.msdignition.com/products/

Then on accessories... http://www.msdignition.com/products/accessories/

Then on tach adapters... http://www.msdignition.com/info.aspx...256&taxid2=267

Find and get the adapter you need. 94

 

thanks for the help man i email msd to ask them which one i needed as well as proform thanks for the fast replys

 

the tech from msd is telling me i need to hook it up to the other tach signal wire

 

What other tach signal wire?

Exactly what MSD equipment do you have on the car, and what is the MM&Y of car?94

 

its a 91 integra, converted to obd1, with an obd2 msd dizzy, sportcompact coil and the driver they said the tach wire i hooked to is messed up and use the blue wire in the main harness ill post back tonight when the new one gets here

 

well it worked without the tach adapter wiring to the original wire i thought had to get a better connection to it

 

IC, I thought you had the complete MSD system, not just the distributor and coil.

But good that you got it working. 94

 

its still a little jumpy but i appreciate the help and fast responses