k24/k20 frank ek part out
Thread Starter
Honda-Tech Member
Joined: Feb 2008
Posts: 198
Likes: 0
From: fridley, mn, united state
SOLD BIKE RACK
NEW PRICE EVERYONE
FULL BRAKE TUCK,SHAVED, AND WIRE TUCK ENGINE BAY
2k for shell
all new ball joints,wheel bearing,trailor arm bushing has been replace with brand new plus alignment cost me 834.00 to do everything and will have receipt for everything.Body is in fair condition. It has a 5 inch scratch in rear passenger quarter panel. Can easy be buff out. 3 inch crack on rear bumper underneath the rear passenger tail lights, and paint cracks on front lips.Besides that i mean everything works great with no wiring problem. Power door locks and power window.(NO-RUST) or DENTS at all besides what i stated above about the scratch,cracks on rear bumper, and cracks on front lips.
99 si front end with oem si lip (lip has cracks)
bronze e-gay head lights with 8k HID (blue)
si fog lights
jdm ek9 side markers
ctr- replica rear lip
jdm thin side molding
spoon mirrors
hybrid conversion harness
eg sub frame and rack n pinion
carbon fiber spoon spoiler = SOLD
16 inch black slip very mint with almost brand new nitto gen tires = SOLD
hybrid billet race mount ekk2 = SOLD
karcept shifter plate with box and cables = SOLD
hybrid clutch line = SOLD
drive shaft shop stage zero axle = SOLD
interior:
it aint got **** lol except the two si front seats and the carpets from the rear seats.converted to power window and power door locks.
3.5k longlock plus shipping = SOLD
swap:
stock port k20a2 head
super-tech retainers and spring
stock valves
ips k-2 cams
hybrid racing ported rbc manifold
type s throttle body
750 rc injectors
engine harness also included
k24a4 block with wiseco 12.5 compression
unknown after market rods
balance crank and polish
acl race bearings
type s oil pump
cometic head gasket
arp head studs
450 plus shipping
bdl fuel rail
aeromotive fpr
forgot the name brand fuel filter
300 plus shipping k-tune passenger radiator with mishimoto slim fan and upper,lower hoses = SOLD
blox pro drag suspension 600 miles only.= SOLD
600 plus shipping
12k in front 18k rear
500 plus shipping
r-crew rep header
3inch vibrant cat back all the way
275 plus shipping= roughly about 600 miles on competition stage 4 clutch n pressure plate
stock a2 fly wheel = SOLD
800 plus shipping= 06 si tranny 4.7 with oem LSD tranny very mint no grinds guarantee
speed mph is not working, cause i was too lazy to redrill and put a ring gear on the final drive. but hey it still works fine lol
k-pro 1000 plus shipping = SOLD
tuned on k-pro
put out 256hp and 193 tourqe on mustang dyno (E-85) mustang dyno

NEW PRICE EVERYONE
FULL BRAKE TUCK,SHAVED, AND WIRE TUCK ENGINE BAY
2k for shell
all new ball joints,wheel bearing,trailor arm bushing has been replace with brand new plus alignment cost me 834.00 to do everything and will have receipt for everything.Body is in fair condition. It has a 5 inch scratch in rear passenger quarter panel. Can easy be buff out. 3 inch crack on rear bumper underneath the rear passenger tail lights, and paint cracks on front lips.Besides that i mean everything works great with no wiring problem. Power door locks and power window.(NO-RUST) or DENTS at all besides what i stated above about the scratch,cracks on rear bumper, and cracks on front lips.
99 si front end with oem si lip (lip has cracks)
bronze e-gay head lights with 8k HID (blue)
si fog lights
jdm ek9 side markers
ctr- replica rear lip
jdm thin side molding
spoon mirrors
hybrid conversion harness
eg sub frame and rack n pinion
carbon fiber spoon spoiler = SOLD
16 inch black slip very mint with almost brand new nitto gen tires = SOLD
hybrid billet race mount ekk2 = SOLD
karcept shifter plate with box and cables = SOLD
hybrid clutch line = SOLD
drive shaft shop stage zero axle = SOLD
interior:
it aint got **** lol except the two si front seats and the carpets from the rear seats.converted to power window and power door locks.
3.5k longlock plus shipping = SOLD
swap:
stock port k20a2 head
super-tech retainers and spring
stock valves
ips k-2 cams
hybrid racing ported rbc manifold
type s throttle body
750 rc injectors
engine harness also included
k24a4 block with wiseco 12.5 compression
unknown after market rods
balance crank and polish
acl race bearings
type s oil pump
cometic head gasket
arp head studs
450 plus shipping
bdl fuel rail
aeromotive fpr
forgot the name brand fuel filter
300 plus shipping k-tune passenger radiator with mishimoto slim fan and upper,lower hoses = SOLD
blox pro drag suspension 600 miles only.= SOLD
600 plus shipping
12k in front 18k rear
500 plus shipping
r-crew rep header
3inch vibrant cat back all the way
275 plus shipping= roughly about 600 miles on competition stage 4 clutch n pressure plate
stock a2 fly wheel = SOLD
800 plus shipping= 06 si tranny 4.7 with oem LSD tranny very mint no grinds guarantee
speed mph is not working, cause i was too lazy to redrill and put a ring gear on the final drive. but hey it still works fine lol
k-pro 1000 plus shipping = SOLD
tuned on k-pro
put out 256hp and 193 tourqe on mustang dyno (E-85) mustang dyno

Last edited by streetdemons; Jun 2, 2011 at 08:27 PM.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Feb 2008
Posts: 198
Likes: 0
From: fridley, mn, united state
pm replied. well im not much trying to part the head off but if i can get a good amount for the head complete then yes i might part it out. otherwise its gonna stay with the block and sell complete
Thread Starter
Honda-Tech Member
Joined: Feb 2008
Posts: 198
Likes: 0
From: fridley, mn, united state
Thread Starter
Honda-Tech Member
Joined: Feb 2008
Posts: 198
Likes: 0
From: fridley, mn, united state
Thread
Thread Starter
Forum
Replies
Last Post
nokia87
Texas -OK -LA (Sales)
16
Jul 12, 2009 11:25 AM
fake mugen power
Southern California (Sales)
9
Aug 14, 2007 05:24 PM
llxzxll
For Sale
18
Sep 18, 2005 12:27 PM




