1.8 60' times on Falken Azenis
Thread Starter
Honda-Tech Member
Joined: Jun 2000
Posts: 2,577
Likes: 0
From: Queens, NYC
1.8 60' times on Falken Azenis
I was talking to some friends of mine a few weeks ago and one of them told me that he knew of someone who got 1.8 60' times on Falken Azenis...is that possible?
Smarter than you
iTrader: (1)
Joined: Apr 2001
Posts: 8,240
Likes: 2
From: Third Coast, united states
Re: 1.8 60' times on Falken Azenis (VTEC-MAN95GSR)
I remember about a year ago I made a post asking if anyone had hit 1.9 60ft on street tires(including drag radials) in a FWD honda. No one had done it, now, many people are doing it. But not on falken azenis i doubt it.
Trending Topics
Honda-Tech Member
Joined: Jul 2001
Posts: 3,611
Likes: 3
From: Boston, MA, USA
Re: 1.8 60' times on Falken Azenis (On Point EK)
didnt Evil -GSR do a 1.80 60 foot..........if not he did something close
Member
Joined: Nov 2001
Posts: 2,648
Likes: 0
From: Biggest Little City
Re: 1.8 60' times on Falken Azenis (nfn15037)
that seems entirely too low for street tires. my friends 240sx w/ sr20det hits consistent 1.6's and the occasional 1.5 but that's on 22" slicks. imagine w/ some 26''s?????
Senior Member
Joined: Jan 2002
Posts: 1,353
Likes: 1
From: Sydney Australia
Re: 1.8 60' times on Falken Azenis (OneStunna)
Your gonna have to provide more info on that setup to prevent flamage hehe
I ran a 1.9 60 on Yokohama 205/60 x 13 A032R's BUT car has to be LIGHT!!!
I'm sure Erick would run better on these than I have
I ran a 1.9 60 on Yokohama 205/60 x 13 A032R's BUT car has to be LIGHT!!!
I'm sure Erick would run better on these than I have
D Tranny Guru
Joined: Oct 2001
Posts: 8,725
Likes: 8
From: Cincity, OH, USA
Re: 1.8 60' times on Falken Azenis (OneStunna)
no flames please but i did a 1.6 60ft with my toyo proxies fz4 in my crx with stock b16. average was 1.8
Honda-Tech Member
Joined: May 2000
Posts: 2,137
Likes: 0
From: Bada BING, NJ, USA
Re: 1.8 60' times on Falken Azenis (Mista Bone)
I have hit two 1.9 60fts on the stock michelins in my GSR. I dont see why it wouldn't be possible to hit thesame on azena's. I think suspension plays a very big role in the 60ft. The tire helps a lot, but if your car is setup right, you can make any tire look good in the 1/4 mile.
EVIL
EVIL
Honda-Tech Member
Joined: Mar 2002
Posts: 623
Likes: 1
From: Manitoba, Canada
Re: 1.8 60' times on Falken Azenis (b16a4me)
hehe it sounds unbelievable but here was my setup then:
90 CRX Si stripped rear
STOCK suspension
b16a1 with s1 tranny and iceman intake
15 inch rims with 205/50/15 toyo fz4's
1.6 60ft, 14.8@90 mph
and no i didn't stage with the rear wheels
after that i got bfg drag radials but never got to the track again. I'm almost thinking of getting another set of fz4's
[Modified by OneStunna, 5:33 PM 12/27/2002]
90 CRX Si stripped rear
STOCK suspension
b16a1 with s1 tranny and iceman intake
15 inch rims with 205/50/15 toyo fz4's
1.6 60ft, 14.8@90 mph
and no i didn't stage with the rear wheels
after that i got bfg drag radials but never got to the track again. I'm almost thinking of getting another set of fz4's
[Modified by OneStunna, 5:33 PM 12/27/2002]
D Tranny Guru
Joined: Oct 2001
Posts: 8,725
Likes: 8
From: Cincity, OH, USA
Re: 1.8 60' times on Falken Azenis (OneStunna)
most likely a error with the lights, or car was too low, seriously.
I'll break out the .661 60 foot timeslip if needed to prove lights can be out of wack.
My RT on that pass was a near perfect .505!
I'll break out the .661 60 foot timeslip if needed to prove lights can be out of wack.
My RT on that pass was a near perfect .505!
New User
Joined: Feb 2001
Posts: 5,141
Likes: 0
From: VIRGINIA
Re: 1.8 60' times on Falken Azenis (OneStunna)
hehe it sounds unbelievable but here was my setup then:
90 CRX Si stripped rear
STOCK suspension
b16a1 with s1 tranny and iceman intake
15 inch rims with 205/50/15 toyo fz4's
1.6 60ft, 14.8@90 mph
and no i didn't stage with the rear wheels
after that i got bfg drag radials but never got to the track again. I'm almost thinking of getting another set of fz4's
90 CRX Si stripped rear
STOCK suspension
b16a1 with s1 tranny and iceman intake
15 inch rims with 205/50/15 toyo fz4's
1.6 60ft, 14.8@90 mph
and no i didn't stage with the rear wheels
after that i got bfg drag radials but never got to the track again. I'm almost thinking of getting another set of fz4's
Better than steak
Joined: Jan 2000
Posts: 16,859
Likes: 0
Re: 1.8 60' times on Falken Azenis (jinxproof99)
hehe it sounds unbelievable but here was my setup then:
90 CRX Si stripped rear
STOCK suspension
b16a1 with s1 tranny and iceman intake
15 inch rims with 205/50/15 toyo fz4's
1.6 60ft, 14.8@90 mph
and no i didn't stage with the rear wheels
after that i got bfg drag radials but never got to the track again. I'm almost thinking of getting another set of fz4's
timeslip or track error. a 1.6 is not possible. i'm not saying your slip didn't read a 1.6. it probably did. but thats not what your actual 60 was. same thing happened with the cybernations car. its happened before.
90 CRX Si stripped rear
STOCK suspension
b16a1 with s1 tranny and iceman intake
15 inch rims with 205/50/15 toyo fz4's
1.6 60ft, 14.8@90 mph
and no i didn't stage with the rear wheels
after that i got bfg drag radials but never got to the track again. I'm almost thinking of getting another set of fz4's
timeslip or track error. a 1.6 is not possible. i'm not saying your slip didn't read a 1.6. it probably did. but thats not what your actual 60 was. same thing happened with the cybernations car. its happened before.
art
Honda-Tech Member
Joined: Mar 2002
Posts: 623
Likes: 1
From: Manitoba, Canada
Re: 1.8 60' times on Falken Azenis
its very possibly it was a timeslip error, i have no idea. Just telling you what the slip told me. I'm not gonna sit here and insist i pulled that time cause you guys have alot more experience with this than me.
Thread
Thread Starter
Forum
Replies
Last Post