Old.

Removing...

 

^your on civic4g.com
whats up!!! love the replacement.

 

Interested in how you did the work. What did you remove it with? I would assume you welded it back on. What setup are you using?

Looks like some fine good work. Great job.

 

Yo! Thank You Sir! Working on getting the paint finished now.

Every spot weld is drilled through only the first layer...
Then an air-chisel is used to seperate the pieces...
Then we fit the new bulkhead by doing any metalwork needed for a factory fit.
Then measurments are taken multiple times to assure correct placement and the new OEM bulkhead gets welded in place.
By "setup" do you mean what welder?
Lincoln wire feed, 120V using .035 flux core. I need to get my bottle filled
to get on the gas and MiG.

 

just real quick comment for ya.. what u replaced was a radiator support. not a bulkhead.. bulkhead is another term for firewall...

 

As far as HONDA is concerned......

-It's called the "Front Bulkhead"
Honda Part#60400-SH3-306ZZ
Illustration #005
BULKHEAD, FR
http://www.hondaautomotiveparts.com

-Here is a link to a picture right out of the manual pictured above...
http://www.tenbytencustomcarbon.com/#!__front-bulkhead-replacment

 

Oh well never heard it called that guess just hondas.

 

good thing you quoted all the pictures or I wouldn't have known what you meant

 

what points did you measure to make sure the bulkhead was perfectly lined up and in spec? I have an ef myself that I just got back from a shop for a minor fender bender.

Long story short, im gonna order a new bulkhead and throw her on.

 

I added that pic for you here..
http://www.tenbytencustomcarbon.com/#!__front-bulkhead-replacment

 

very much appreciated

 

I'll have a whole detailed write-up done soon available at that link

 

subscribed.

ill keep an eye on this thread and definitely check it out once you finish