PA 2000 Honda Civic EX molded body kit, swapped engine, etc.
Thread Starter
Honda-Tech Member
Joined: Mar 2011
Posts: 7
Likes: 0
2000 Honda Civic EX molded body kit, swapped engine, etc.
Clear title in hand, inspected, runs great, and gets 34 MPG!
Inspected until July 2011
Call / Text Matt at 717-644-4611. Please, SERIOUS INQUIRIES ONLY. NO TRADES. Read the details before contacting me.
Email: matt [ at ] ctmstudios [ dot ] net
Asking $3900 OBO.
This is a great project car! The engine runs great - the body needs a bit of touch up. (I've taken pictures of these areas)
This is to be expected with a fiberglass bodykit; you should be handy with Bondo and Painting if you buy this car.
The oil-pan is tapped and ready for turbo oil lines - you can leave the lines plugged if you aren't planning to turbo.
The engine has been ported and polished and has Turbo CAMs (If you don't want to turbo it, this will not hurt the engine).
The oil feed has been T'd off for a pressure gauge and oil feed line. Looking for a SALE, not a trade.
5-Speed Manual, maintained well with regular oil changes.
Engine:
• D16Y8 1.6L SOHC VTEC
• Recently swapped, only ~60K miles on it - The swap engine model is the same as the factory model (D16Y8)
• Turbo CAMs
• All new seals / gaskets from the ground up
• New timing belt
• Short RAM air intake
• Doesn't burn oil
Body / Extras:
• 17 Inch Motegi Racing rims, tire size is 205/40/17 (Rims show decent wear, should be repainted)
• Projector headlights, aftermarket taillights
• Nice-sounding exhaust
• New brake rotors for super-smooth braking
• Pioneer head unit
• Sony speakers all around, fantastic sound
• Blitz Audio 2,400 Watt amp
• (2) 1,200 Watt / Each Sony Xplod subwoofers
• Bass controller mounted on back of arm rest
• Oil pressure and vacuum gauges
• Custom paint (Mostly good condition; rear bumper needs minor body work and some touch-up paint)
• Decals
• Body kit, molded rear bumper
• Spoiler (Needs some touch-up paint)
• Custom, clean interior (NON-smoking driver!)
• Battery has been relocated to trunk
• Viper security with remote start
Click the photos to enlarge.
Inspected until July 2011
Call / Text Matt at 717-644-4611. Please, SERIOUS INQUIRIES ONLY. NO TRADES. Read the details before contacting me.
Email: matt [ at ] ctmstudios [ dot ] net
Asking $3900 OBO.
This is a great project car! The engine runs great - the body needs a bit of touch up. (I've taken pictures of these areas)
This is to be expected with a fiberglass bodykit; you should be handy with Bondo and Painting if you buy this car.
The oil-pan is tapped and ready for turbo oil lines - you can leave the lines plugged if you aren't planning to turbo.
The engine has been ported and polished and has Turbo CAMs (If you don't want to turbo it, this will not hurt the engine).
The oil feed has been T'd off for a pressure gauge and oil feed line. Looking for a SALE, not a trade.
5-Speed Manual, maintained well with regular oil changes.
Engine:
• D16Y8 1.6L SOHC VTEC
• Recently swapped, only ~60K miles on it - The swap engine model is the same as the factory model (D16Y8)
• Turbo CAMs
• All new seals / gaskets from the ground up
• New timing belt
• Short RAM air intake
• Doesn't burn oil
Body / Extras:
• 17 Inch Motegi Racing rims, tire size is 205/40/17 (Rims show decent wear, should be repainted)
• Projector headlights, aftermarket taillights
• Nice-sounding exhaust
• New brake rotors for super-smooth braking
• Pioneer head unit
• Sony speakers all around, fantastic sound
• Blitz Audio 2,400 Watt amp
• (2) 1,200 Watt / Each Sony Xplod subwoofers
• Bass controller mounted on back of arm rest
• Oil pressure and vacuum gauges
• Custom paint (Mostly good condition; rear bumper needs minor body work and some touch-up paint)
• Decals
• Body kit, molded rear bumper
• Spoiler (Needs some touch-up paint)
• Custom, clean interior (NON-smoking driver!)
• Battery has been relocated to trunk
• Viper security with remote start
Click the photos to enlarge.
Last edited by CT-Matt; Apr 30, 2011 at 08:21 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Notorious SI-G
Forced Induction
3
May 2, 2005 09:04 AM
