For a USDM Type R... Anybody know off the top of their heads?

Thank you!

 

According to the Acura sales brochures:

Front: 11.1" (282mm) diameter, .98" (25mm) thick

Rear: 10.2 (260mm) diameter, .39" (10mm) thick

 

I have a 5-lug conversion on my eg hatch... Can the five lug come from any other car than a Type R?

Thanks,

 

What does that mean...can the 5 lug come from any other car than a Type R? Do you mean can you use (for example) a TSX 5 lug and fit it in your hatch? I don't think so...something to do with the axles (k series v. B series) I believe.

Uhmmm, I know people use JDM 5 lug which is slightly different than USDM IIRC. Also, and don't quote me on this, the EK9 CTR 5 lug might be different from the JDM ITR 5 lug.

And since we all want to know, where'd you get your 5 lug?

 

I bought another guys project and I'm trying to account for all the mods.

lucky me, it came with a 5-lug conversion amongst other goodies, and I'm trying to figure out what brakes i have... Thanks.

 

So what other cars can donate a 5-lug conv. to an eg?

 

ITR/CTR = same

 

Usdm itr is the same as the ctr, but the jdm itr uses 36mm axles. The usdm and the ctr use 32mm.

 

These threads are awesome.

ITR forum = dumping ground for sh!tty part-swap questions. Did you post this in the RSX, TSX and 06+ Si forum, too?

 

YOu are not pleased I see, not that I care too much but I apologize that the internet has failed you.

 

Internet has failed OP.

http://lmgtfy.com/?q=type+r+rotor+diameter

First link, y0.

 

I clicked the link. That was fancy!

 

i know its a few years old, but i wanted to share a lawl with any new googlers, the LMGTFY first his is now this page. LOL

 

Haha good stuff...