FS: Catch Can / Breather Set Up ||B-Series||
FS: Catch Can / Breather Set Up ||B-Series||
Price: F*CK IT! I'm Keeping it & the ITBs!
Location: S.FL
Contact: PM - Post Here - 434.989.8980
Condition: NEW unless marked with " * "
The Breakdown - Some people don't realize what's in involved in putting one of these systems together.
Qty. Description Paid
1 Aluminum Catch Can $65
3 -12AN 90degree Swivel $25 each
3 -12AN Straight Swivel $20 each
3 -12AN Weld On Bung $18 each
1 -12AN 90degree Swivel $25
1 -12AN Straight Swivel $20
1 -12AN Plug / Block Off* $20
1 -12AN 14" Braided Hose* $10
1 -12AN 12' Push-Lok Hose $65
2 -12AN B-series Block Fittings $40 each
1 B-series OEM Can Plug $2.50
Total Paid: $476.50
This breather set up was for my car, but I decided to sell the ITBs and this set up. I was planning on running 2 lines to the back of the block, 1 line to the valvecover, and a drain back. There are 3 ports to the top portion of the catch can, but more bungs can be welded on if desired. There is 1 bung on the bottom of the can for the drain back. The only item that's missing is the catch can filter.
These items are just sitting in my house, and the UNpictured items are in the shop right now. I'll take pictures of the Catch Can, and Drain Back and post them later.
Block Fittings and Drain Back Line
Location: S.FL
Contact: PM - Post Here - 434.989.8980
Condition: NEW unless marked with " * "
The Breakdown - Some people don't realize what's in involved in putting one of these systems together.
Qty. Description Paid
1 Aluminum Catch Can $65
3 -12AN 90degree Swivel $25 each
3 -12AN Straight Swivel $20 each
3 -12AN Weld On Bung $18 each
1 -12AN 90degree Swivel $25
1 -12AN Straight Swivel $20
1 -12AN Plug / Block Off* $20
1 -12AN 14" Braided Hose* $10
1 -12AN 12' Push-Lok Hose $65
2 -12AN B-series Block Fittings $40 each
1 B-series OEM Can Plug $2.50
Total Paid: $476.50
This breather set up was for my car, but I decided to sell the ITBs and this set up. I was planning on running 2 lines to the back of the block, 1 line to the valvecover, and a drain back. There are 3 ports to the top portion of the catch can, but more bungs can be welded on if desired. There is 1 bung on the bottom of the can for the drain back. The only item that's missing is the catch can filter.
These items are just sitting in my house, and the UNpictured items are in the shop right now. I'll take pictures of the Catch Can, and Drain Back and post them later.
Block Fittings and Drain Back Line
Last edited by Snail Power; Apr 27, 2011 at 08:02 PM.
Trending Topics
Re: FS: Catch Can / Breather Set Up ||B-Series||
Seriously considering installing the ITBs on my daily driver. If I don't get any interest by this weekend I'm going to move forward.
Re: FS: Catch Can / Breather Set Up ||B-Series||
Its at the welder getting the drain back bung installed. Its a aluminum cylinder approx 2.5" diameter and (guessing) 7" tall. I haven't see it in front of me recently.
Two -12an males on the front, one -12an male on the right side (if looking at it mounted), and one -12an being welded on now for the drain back.
Let me know if you are interested.
Two -12an males on the front, one -12an male on the right side (if looking at it mounted), and one -12an being welded on now for the drain back.
Let me know if you are interested.
Re: FS: Catch Can / Breather Set Up ||B-Series||
Its at the welder's, because I can't weld aluminum. I'm going out of town tomorrow morning for work until the Wednesday-ish next week.
That being said - It will be the middle of next week before I can provide pictures of the can.
That being said - It will be the middle of next week before I can provide pictures of the can.
Thread
Thread Starter
Forum
Replies
Last Post
IN VTEC
Classifieds: Forced Induction
5
Oct 17, 2015 06:42 PM
