does any one knows what spring rate comes in the waste gate,i recive
2 of them today and they come whith 3 spare spring and also
have water outlets its not supose that one comes with water are
the vm-r

 

Tial now supplies all wastegate springs with their gates, so read the chart, or check their website for the spring chart and do what best suits your needs. Mv-r and Mv-s are water cooled..

 

I think mine was a 12lb but then I asked them for a 12lb spring too tho. I believe there was a chart in the box with the differant colors and spring combos.

 

Here is the chart for you..

http://www.tialmedia.com/documents/MVS%20Pressure.pdf



''Tial Sport-
Well, It's official guys - all MV series wastegates (MV-S and MV-R) will now come with every spring made for the unit - no need to order bar pressure anymore - you get all 6 springs in the box. (7 with the MV-R) The Wastegates will come pre-loaded with the 1.5 (MV-R) and 1.7 (MV-S) bar setups from now on.''

 

I just ordered mine with a .5 spring from a sponsor on here. I didn't know they came with extra springs. Good to know.

 

thanks so much you are completly right in all you says,they come ready to rumble,but how i know what spring use if i want to run 40+ and i use
boost controler

 

Just run a spring that is going to be your minimum boost. With a solenoid and co2 setup you can run as much boost as you want.

 

So what about those people like me that bought their mvr in '10 and just have a single spring?

But still good move for tial.

 

You're S.O.L like me hahaha.