quarter rust?
i'm pretty sure, your local junk yard, pull-a-part, pick-n-pull has an integra laying around somewhere with the stuff you need
lol
good luck though
lol
good luck though
Last edited by Jeffaj20; Feb 19, 2011 at 07:49 PM. Reason: hmm, aparently i should refresh before posting. haha sorry for the repeat
Junk yard or dealer is your best bet. I been looking for some panels for my 2dr and they are scarce around my way. Did find one with good quarters but he wouldn't let me cut what I needed and told me 400 per side. I have a old fender that im chopping the bottom off for a patch panel now
car-part.com might be of help.
Trending Topics
I got my quarters, [94 hatch] from Acura parts... #5... http://acuraautomotiveparts.org/acur...ystemcomp=List All&vinnoT=&trim=&trans=&view=normal yous would be, #5/6... http://acuraautomotiveparts.org/acur...ystemcomp=List All&vinnoT=&trim=&trans=&view=normal
I ended up using the whole thing, [both sides] it was actually cheaper to install the whole panel then just a section because of the body work needed if only a section was used.
BTW Jezzz, there is only one Integra, [95] at your local PicknPull, [that sucks] we have 21 of them at our PicknPull, 5 of them 94-up, 2 of them 4 doors. 94
PS Do not reinstall wheel arch protector... #10... http://acuraautomotiveparts.org/acur...ystemcomp=List All&vinnoT=&trim=&trans=&view=normal it seems it's only purpose is to trap and hold dirt and moisture, it is why rust starts at the wheel arch of Honda/Acura that use them, for those who do not have rust at the rear wheel arch, remove the protector now, clean and spray lip with rust proofing, you will thank yourself in a year ot two.
I ended up using the whole thing, [both sides] it was actually cheaper to install the whole panel then just a section because of the body work needed if only a section was used.
BTW Jezzz, there is only one Integra, [95] at your local PicknPull, [that sucks] we have 21 of them at our PicknPull, 5 of them 94-up, 2 of them 4 doors. 94
PS Do not reinstall wheel arch protector... #10... http://acuraautomotiveparts.org/acur...ystemcomp=List All&vinnoT=&trim=&trans=&view=normal it seems it's only purpose is to trap and hold dirt and moisture, it is why rust starts at the wheel arch of Honda/Acura that use them, for those who do not have rust at the rear wheel arch, remove the protector now, clean and spray lip with rust proofing, you will thank yourself in a year ot two.
Last edited by fcm; Feb 20, 2011 at 08:25 AM. Reason: add PS
Thread
Thread Starter
Forum
Replies
Last Post
ThatWhiteDB8
Mid-Atlantic (Sales)
3
Dec 28, 2011 08:14 AM
homeskillet
Honda / Acura
2
Feb 14, 2009 05:31 AM




