All prices are OBO and include shipping, obviously the price will be less if you meet me.

I am located in Nor Cal, about an hour south of San Jose but go there all the time for work. If we do a meet up though I would prefer at the Gilroy outlets. Otherwise, if I ship, I will do my best to have your item shipped and have a tracking number for you the next day, as long as you pay me before noon California time.

>>>>>>>>>>>>>>>NOT IN THE PICTURES<<<<<<<<<<<<<<<
I have a Odyssey PC680 Battery. SOLD

I have the lines to delete the ABS in your in your Integra. SOLD

I have a Blox Billet 68mm throttle body that works fine I just had to go with a bigger one with the new motor I put in. SOLD

You will be getting a ACT 6 puck unsprung disk, heavy duty pressure plate and a Fidanza 8lb flywheel. SOLD

I have a black Skunk 2 Vtec solenoid cover for a small top solenoid. SOLD

Black set of MSD wires. SOLD

I have a set of Golden Eagle head studs for GSR. SOLD

I have a set of ARP head studs for GSR. SOLD



I have a set of OLD SCHOOL SKUNK CAMS, Stage 3. Made a TON of power on these cams but I am sticking with my Blox Bs for my current build. Just like the clutch set up, only 4 dyno passes and 4 passes at the track. They look like new. Asking price is $400FIRM SHIPPED!! (They are my brother's cams)







I have a sets of MSD 8.5mm Super Conductor wires, a red set. The red set was used on my 2.2 liter, so only a few dyno passes and some time at the track. Either set looks like it just came from the box. Asking price, $45 OBO for either one, SHIPPED!! PENDING





I have a Vtec B series timing belt that I used on my old motor, bout 5 k on it. I took the old one off and did a big tune up including dumping my AEM cam gears so I decided to put a new belt on. Asking price, $25 OBO SHIPPED!!






I have a OBD1 BIG TOP Vtec solenoid that worked perfect when it was on my car except the top gasket has a tiny leak but that's OK because I am throwing in a new gasket for the top half. After that, it will work perfect. Asking price, $65 OBO SHIPPED!!




I have a generic ECU jumper that I used on my 97 integra to run a chipped P28. I used this 2 times, yep twice, then jumped the gun and bought a Rywire harness that has this integrated in it. Asking price, $35 OBO SHIPPED!!




I have a filter for a Blox velocity stack, decided not to run a filter when the stack is on so it can go. $20 OBO shipped or with any other item for free, you pay shipping.




I have a B series valve cover that has been cut for gears, shaved and black wrinkle coated and is flawless. It is as straight as an arrow with no bondo underneath, all metal. I had to do this thing, strip it down and start all over again 3 times before it came out perfect. I used this to get my car tuned then took it off when I tuned my car incase any cops popped my hood. Asking price, $110 FIRM SHIPPED!!






I have a bunch of miscellaneous MSD wires, connectors, clamps, boots etc, Shoot me an offer on anything you see.





I have a black dash with air bag, rear quarter panels and door panels that are in ok condition. I had to modify them to make them fit my 97 GSR, it come from an integra without a side impact beam and I had to work around that. They aren't perfect, but your would be 80% close to changing your car from peanut butter to black. $75 OBO picked up for everything, and I will throw in a climate control.






I have a stock white GSR spoiler, just pick this thing up and take it.

 

pm me a price on the cams, flywheel clutch setup, jumper harness and throttle body

 

PM sent.

 

bump

 

Sold the Clutch set up to a buddy at work that toasted his clutch so bad he couldn't get it into gear.

Sold the PC 680 and the delete lines too.

SOld the throtle body to a buddy at work.

 

Yo, interested in the Red MSD 8.5 hi-ten wires.

Can i get your contact # so i can call you?

Thanks!

 

PM sent.

I am selling those at a killer price considering how near new they are!!

 

Everything updated, prices dropped.

 

 

Bump