fs Fs and only fs. B-series custom header, Ls Aebs T-sleeved block, k24 complete long
Thread Starter
Honda-Tech Member
Joined: Nov 2004
Posts: 1,369
Likes: 0
From: socal, Ca, US
fs Fs and only fs. B-series custom header, Ls Aebs T-sleeved block, k24 complete long
pics will be up by this weekend. If you need pics before the weekend let me know and I will make time to take pics.
text 760-215-0933
Pics will be up by this weekend if you need pics before just let me know and I’ll make time to go take them
B-series header custom side exit header can slightly be modded to come out the hood $old
TWM itb’s 52mm $1200 b-series
Ls AEBS T-sleeved block 84mm with crank no pistons and rods $800 or $950 with ls crower rods Pending
K24 long Block. Don’t know its history but its complete. $600
K20a2 disassembled block have everything to put it back together $200
2006 rsx-s tranny comes with the 4.7 FD new second gear $700
K-tuned traction bars $old
Apexi N1 pro coilover suspension for Eg or DC comes with rear Type R LCA’s. $old
92 civic cx EG shell project shell K-ready $700 I have the pink and yes it’s under my name. I reffed the shell for a GS-r motor $old
92-95 Civic eg Jdm armrest black with cupholder $100
blox 4 inch velocity stack New in box $40
clutch power 6 puck sprung with heavy duty pressure plate $200
Benen black tow hooks with vin ID $80
Wet nitrous kit direct port with lines and solenoids 10lbs bottle and cheater bottle no jets $300
Kirkey racing seat with TC seat rails $200
Out the hood
Side exit
Ls aebs t-sleeved block
Traction bars and yes thats my eg shell as you can see it was prepped for a k20 but i parted out the swap. the car is completely gutted. no dash or nothing. I do have all the stock interior and also a full black interior from an Si hatch that will come with the car. The hatch comes with gs-r 4 wheel disc brakes, extended studs in the front, steel braided front brake lines, jdm sidemarkers, yellow foglights. Yes I have the pink on hand I have the state reff papers. The car is sitting on the apexi pro suspension with ITR rear lower arms and traction bars will leave them on if I am offered the right price other than that I will put the stock suspension back on and you can pick up the shell.
Rsx-s 2006 tranny 4.7 FD A guy came by and wanted to look at the internals too make sure it was a good tranny. He tried lowballing and now I don’t know how to Put it together. Has a brand new second gear.
Kirky Racing aluminum seat 2 sets of brackets
B-series 6 puck sprung clutch with heavy duty pressure plate only on the motor for less than 100 miles.
52mm TWM ITB’s for b16 head newer version will not come with injectors or TB cable.
K24 block complete the cams are off as you can see in the pics
K20a2 block torn apart forgot to take pics of the rods and pistons and yes it does come with the oil pan and chain with the stock oil pan but its craked so I have a k24 oil pan for it.
text 760-215-0933
Pics will be up by this weekend if you need pics before just let me know and I’ll make time to go take them
B-series header custom side exit header can slightly be modded to come out the hood $old
TWM itb’s 52mm $1200 b-series
Ls AEBS T-sleeved block 84mm with crank no pistons and rods $800 or $950 with ls crower rods Pending
K24 long Block. Don’t know its history but its complete. $600
K20a2 disassembled block have everything to put it back together $200
2006 rsx-s tranny comes with the 4.7 FD new second gear $700
K-tuned traction bars $old
Apexi N1 pro coilover suspension for Eg or DC comes with rear Type R LCA’s. $old
92 civic cx EG shell project shell K-ready $700 I have the pink and yes it’s under my name. I reffed the shell for a GS-r motor $old
92-95 Civic eg Jdm armrest black with cupholder $100
blox 4 inch velocity stack New in box $40
clutch power 6 puck sprung with heavy duty pressure plate $200
Benen black tow hooks with vin ID $80
Wet nitrous kit direct port with lines and solenoids 10lbs bottle and cheater bottle no jets $300
Kirkey racing seat with TC seat rails $200
Out the hood
Side exit
Ls aebs t-sleeved block
Traction bars and yes thats my eg shell as you can see it was prepped for a k20 but i parted out the swap. the car is completely gutted. no dash or nothing. I do have all the stock interior and also a full black interior from an Si hatch that will come with the car. The hatch comes with gs-r 4 wheel disc brakes, extended studs in the front, steel braided front brake lines, jdm sidemarkers, yellow foglights. Yes I have the pink on hand I have the state reff papers. The car is sitting on the apexi pro suspension with ITR rear lower arms and traction bars will leave them on if I am offered the right price other than that I will put the stock suspension back on and you can pick up the shell.
Rsx-s 2006 tranny 4.7 FD A guy came by and wanted to look at the internals too make sure it was a good tranny. He tried lowballing and now I don’t know how to Put it together. Has a brand new second gear.
Kirky Racing aluminum seat 2 sets of brackets
B-series 6 puck sprung clutch with heavy duty pressure plate only on the motor for less than 100 miles.
52mm TWM ITB’s for b16 head newer version will not come with injectors or TB cable.
K24 block complete the cams are off as you can see in the pics
K20a2 block torn apart forgot to take pics of the rods and pistons and yes it does come with the oil pan and chain with the stock oil pan but its craked so I have a k24 oil pan for it.
Last edited by aser1z; Feb 14, 2011 at 07:41 PM.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Nov 2004
Posts: 1,369
Likes: 0
From: socal, Ca, US
Re: fs Fs and only fs. B-series custom header, Ls Aebs T-sleeved block, k24 complete
yes 700 for the shell but I have someone looking to pick it up with the apexi pro suspension and traction bars for $1500 I forgot to mention the shell is prepped for a k20 motor. Has foglights, stanley sidemarkers, comes with both stock blue interior and complete black interior off an si eg, ex cluster, 4 wheel disc brakes of an integra with extended studs in the front and steel braided brake lines in the front, its missing the hood.
![Black-Ty [EG6]'s Avatar](https://honda-tech.com/forums/customavatars/avatar999547556_3.gif){kind=avatar}
Thread Starter
Honda-Tech Member
Joined: Nov 2004
Posts: 1,369
Likes: 0
From: socal, Ca, US
Re: fs Fs and only fs. B-series custom header, Ls Aebs T-sleeved block, k24 complete
Will get the header pics and info by tomorrow also will have pics of the k24 block, k20a2 block, TWM ITB's and LS aebs tsleeved block tomorrow by midday.
Honda-Tech Member
Joined: Aug 2009
Posts: 7,635
Likes: 3
From: Baton Rouge,Louisiana
Re: fs Fs and only fs. B-series custom header, Ls Aebs T-sleeved block, k24 complete
do the itbs fit a gsr head? If so, what color fuel rail and would you be interested in trading the ITBS for a induction system?(3'' intake, 70MM TB,ported victorX, Golden eagle fuelrail)
Thread Starter
Honda-Tech Member
Joined: Nov 2004
Posts: 1,369
Likes: 0
From: socal, Ca, US
Re: fs Fs and only fs. B-series custom header, Ls Aebs T-sleeved block, k24 complete
ITB's are for a b16 head and no trades sorry. Cash talks. nitrous pics, blox velocity stack pic will be coming soon.