AC COMPETITION TWIN DISK ISSUE
Thread Starter
Honda-Tech Member
Joined: Apr 2008
Posts: 236
Likes: 0
From: Como, Italy
AC COMPETITION TWIN DISK ISSUE
Hi guys i've installed a twin disk clutch on my b16a2 ( EG hatch) but when tring to push the peda, half run is soft, then extremey hard and clutch does not open. I have a new master and slave cilynder - 3 stainless teflon line, new oil, no air in circuit.... bla bla....
Do someone have had same problem? I tryed also with omni power master cyl but worst than oem one... Any ideas guys?
thks
Thread Starter
Honda-Tech Member
Joined: Apr 2008
Posts: 236
Likes: 0
From: Como, Italy
Re: AC COMPETITION TWIN DISK ISSUE
Hi guys i've installed a twin disk clutch on my b16a2 ( EG hatch) but when tring to push the peda, half run is soft, then extremey hard and clutch does not open. I have a new master and slave cilynder - 3 stainless teflon line, new oil, no air in circuit.... bla bla....
Do someone have had same problem? I tryed also with omni power master cyl but worst than oem one... Any ideas guys?
thks
Thread
Thread Starter
Forum
Replies
Last Post
Rpc07
Forced Induction
7
Oct 7, 2003 03:36 PM
