02 SENSOR - WHICH WiRE GOES WHERE?!
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: May 2009
Posts: 223
Likes: 0
From: Thunder Bay , Ontario
02 SENSOR - WHICH WiRE GOES WHERE?!
Recently swapped a 98 b18c1 out of a 98 GSR. p72 ecu - OBd2.
Into my 93 Civic CX - with OBD1 to OBD2 Conversion harness.
I cut out the secondary o2 out of the Integra and cannot find how to wire it up.
The Plug is :
1. Black/Yellow
2. Orange/Blue
3. Blue/Red
4. Green/Red
Which wires are signal wire, sensor wire, and black(heater) wires.
If anyone can direct me or help me with this would be much appreciated. Write ups, diagrams that i havent found, anything.
Into my 93 Civic CX - with OBD1 to OBD2 Conversion harness.
I cut out the secondary o2 out of the Integra and cannot find how to wire it up.
The Plug is :
1. Black/Yellow
2. Orange/Blue
3. Blue/Red
4. Green/Red
Which wires are signal wire, sensor wire, and black(heater) wires.
If anyone can direct me or help me with this would be much appreciated. Write ups, diagrams that i havent found, anything.
Thread
Thread Starter
Forum
Replies
Last Post
Xemu
Honda CRX / EF Civic (1988 - 1991)
16
Nov 1, 2006 04:30 PM
