FS:1996 Accord 2dr LX H23A(bluetop engine)
Thread Starter
Honda-Tech Member
Joined: Jun 2003
Posts: 384
Likes: 0
From: 562, CA, USA
FS:1996 Accord 2dr LX H23A(bluetop engine)
FS: 1996 Accord LX coupe (updated price!)
5 speed manual transmission
H23A blue top engine, but with my old H22A head w/ Alaniz Street Master head
h23 manual tensioner conversion
JUN cams/dual valvesprings/cam sprockets
Hytech header
Custom exhaust (2.5" mandrel bent) w/ G35 sedan muffler
Blacktrax stacking plate in OE intake manifold w/ hondata gasket.
RC ported Throttle body to 64mm
3" short intake w/ BPI flow stack and K&N filter
AEM fuel rail w/ RC 440cc injectors
255lph Walbro fuel pump
Tein Super Street coilovers w/ pillowball mounts 12kg/mm front springs and 16kg/mm rear springs and shocks have been revalved.
Neuspeed front strut bar (not pictured)
Cusco front lower tie bar and rear upper strut bar
Skunk2 rear lower tie bar
S/T rear sway bar
16" Rota Subzeros w/ Falken Azenis 225/50/16 (rear has 100% tread/ front has 20% tread)
H22A M2A4 transmission w/ Quaife ATB and M Factory 4.63 FD
Acura legend 2 piston calipers/Project Mu Bforce pads and 5 lug conversion in front
Rear disc conversion
Hondata S300 fully tuned when I used to work at Church Automotive Testing. All graphs available.
PSPEC short shifter.
Autopower 4pt rollbar w/ harness bar.
Prelude front seats
S2000 steering wheel
Greddy oil catch can
JDM SIR spoiler.
JDM clear headlamps.
I'm sure I've forgotten some stuff.
Car runs great it's barely been driven the past 3 years.
Some stuff I'll put out there now... It has a 3rd gear grind.
There is no power steering and a/c.
There are dings and clear has oxidized on LT QTR panel/roof/ and top of trunk.
Got a new job and moving so must let her go finally.
Asking for $2700.00
Parting the car out alone is worth a lot more, but easier at this point to sell the car whole and I don't have the time to part her out. thomlees@yahoo.com
Please email me for inquiries thomlees@yahoo.com
5 speed manual transmission
H23A blue top engine, but with my old H22A head w/ Alaniz Street Master head
h23 manual tensioner conversion
JUN cams/dual valvesprings/cam sprockets
Hytech header
Custom exhaust (2.5" mandrel bent) w/ G35 sedan muffler
Blacktrax stacking plate in OE intake manifold w/ hondata gasket.
RC ported Throttle body to 64mm
3" short intake w/ BPI flow stack and K&N filter
AEM fuel rail w/ RC 440cc injectors
255lph Walbro fuel pump
Tein Super Street coilovers w/ pillowball mounts 12kg/mm front springs and 16kg/mm rear springs and shocks have been revalved.
Neuspeed front strut bar (not pictured)
Cusco front lower tie bar and rear upper strut bar
Skunk2 rear lower tie bar
S/T rear sway bar
16" Rota Subzeros w/ Falken Azenis 225/50/16 (rear has 100% tread/ front has 20% tread)
H22A M2A4 transmission w/ Quaife ATB and M Factory 4.63 FD
Acura legend 2 piston calipers/Project Mu Bforce pads and 5 lug conversion in front
Rear disc conversion
Hondata S300 fully tuned when I used to work at Church Automotive Testing. All graphs available.
PSPEC short shifter.
Autopower 4pt rollbar w/ harness bar.
Prelude front seats
S2000 steering wheel
Greddy oil catch can
JDM SIR spoiler.
JDM clear headlamps.
I'm sure I've forgotten some stuff.
Car runs great it's barely been driven the past 3 years.
Some stuff I'll put out there now... It has a 3rd gear grind.
There is no power steering and a/c.
There are dings and clear has oxidized on LT QTR panel/roof/ and top of trunk.
Got a new job and moving so must let her go finally.
Asking for $2700.00
Parting the car out alone is worth a lot more, but easier at this point to sell the car whole and I don't have the time to part her out. thomlees@yahoo.com
Please email me for inquiries thomlees@yahoo.com
![Black-Ty [EG6]'s Avatar](https://honda-tech.com/forums/customavatars/avatar999547556_3.gif){kind=avatar}
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
fire7882
Honda Civic / Del Sol (1992 - 2000)
3
Jul 22, 2003 09:32 AM
